SKF N 064 lock nut

SKF N 064 is a reference of lock nut, within Bushings and sleeves. Request a quote for N 064 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF N series lock nuts are the inch version of the well-known KM nuts: they secure a bearing on its adapter sleeve or at the shaft end, and are locked with a W series lock washer of the same number. They are used in machines and housings of North American origin, where the shaft and adapter sleeve come in inch sizes.

The nut number indicates the thread size, and it pairs with the washer: an N 10 is locked with a W 10. The nut tightens the bearing against the tapered adapter sleeve or against the shaft shoulder, and the lock washer prevents it from loosening with vibration: one of its tabs is bent into one of the nut slots.

To mount it, use a hook spanner of the correct size, never a punch and hammer, which damage the slots and leave the nut unable to be retightened. In adapter sleeve mounts, the tightening defines the final internal clearance of the bearing, so it is advisable to follow the tightening angle indicated by the bearing manufacturer.

When replacing a bearing, it is recommended to also replace the lock washer: a tab that has already been bent once loses strength. The nut can be reused if the thread and slots are in good condition.

To request a quote, send us the complete nut designation via WhatsApp, or that of the adapter sleeve or bearing it will secure, and we will tell you which nut and which washer correspond.