SKF FSAF 22220 sAF split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SAF split plummer block housing
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF FSAF 22220 is a reference of sAF split plummer block housing, within Bearing housings. Request a quote for FSAF 22220 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SAF split plummer block housing is a bearing mounting component that is assembled in two halves, which facilitates installation and maintenance on transmission shafts. It is used to support radial and axial loads in rotating equipment, allowing the accommodation of bearings with tapered or cylindrical inserts. Its robust and versatile design makes it ideal for demanding industrial applications. MR Accesorios Industriales carries this SKF line, a brand that MR carries.
The designation FSAF followed by a number identifies the size and series of the housing. For example, FSAF 216 corresponds to a housing for a shaft with a nominal diameter of 16 inches, while FSAF 313 indicates a size for a 3 3/16 inch shaft. The numbers are not sequential and respond to standardization standards. In the SAF series, the suffix can indicate variants such as sealing or mounting configuration. To choose the correct one, it is essential to verify the shaft diameter and the type of bearing to be used.
These housings are used in a wide variety of industries in Argentina, such as food, cement, mining, petrochemical and materials handling. They are found in conveyors, mills, mixers, pumps, fans and gear reducers. Their ability to withstand combined loads and moderate misalignments makes them suitable for environments with dust, humidity or variable temperatures. The split construction allows the bearing to be replaced without disassembling the shaft or the complete equipment, reducing downtime.
For proper selection, take into account the shaft diameter, radial and axial load, and environmental conditions. Sealing is key: choose labyrinths or oil seals depending on contamination. Lubrication can be with grease or oil; verify the method and frequency. Mounting requires aligning the halves and tightening the bolts uniformly to avoid deformation. It is advisable to follow the manufacturer's instructions and use appropriate tools to avoid damaging the bearing during installation.
Regarding equivalences, SKF SAF housings are interchangeable with those of other brands that follow the same dimensional standards, such as the SAF series from Timken or Dodge. However, always verify the exact dimensions and load capacity before replacing. Part numbers may vary between manufacturers, so it is essential to compare technical specifications. At MR Accesorios Industriales we can advise you to find the right replacement for your application.
If you need an SAF split plummer block housing, contact us on WhatsApp and send us the part number or the measurements of your equipment. Our technical team will help you identify the correct product and provide you with a no-obligation quote. At MR Accesorios Industriales we offer reliable solutions for your power transmission systems.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the FSAF designation mean in a split plummer block housing?
- FSAF is the nomenclature that SKF uses for its SAF series split plummer block housings. The number that follows indicates the shaft size and load capacity. For example, FSAF 216 corresponds to a 16-inch shaft. It is important to consult the dimension table to select the correct one.
- Is this housing suitable for axial and radial loads?
- Yes, SAF split plummer block housings are designed to support combined radial and axial loads. Their robust construction and housing for roller bearings allow handling forces in both directions. Always verify the specific load capacity of the model according to your application.
- How is a split plummer block housing mounted?
- Mounting involves placing the two halves around the shaft, aligning correctly and tightening the bolts uniformly. It is essential to lubricate the bearing and verify axial clearance. Follow the manufacturer's instructions and use appropriate tools to avoid damage.