SKF 7X16X7 HMS5 V1 radial shaft seal
- Brand
- SKF
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF 7X16X7 HMS5 V1 is a reference of radial shaft seal, within Seals. Request a quote for 7X16X7 HMS5 V1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF radial shaft seal of the HMS V series is an elastomeric lip seal designed for rotating shafts. Its function is to retain lubricant inside the assembly and prevent the entry of contaminants such as dust, water or particles. It is press-fitted into the housing and works on the shaft, creating a dynamic barrier. It is a key part in pumps, electric motors, gearboxes and industrial equipment in general, where correct sealing extends the service life of bearings and gears.
The designation of the HMS V series is read from the dimension code and the suffixes. For example, in 7X16X7 HMS5 V1, the numbers indicate the dimensions in millimeters: 7 bore diameter, 16 outside diameter and 7 width. The suffix HMS5 identifies the lip type and material, while V1 indicates a specific variant within the series. Knowing this nomenclature allows you to order the exact seal you need.
SKF HMS V series radial shaft seals are used in a wide variety of industries in Argentina: food, chemical, petrochemical, cement and steel, among others. They are present in centrifugal pumps, electric motors, gearboxes, mixers and conveyors. Their ability to withstand moderate speeds and low pressures makes them versatile for rotating equipment where efficient and long-lasting sealing is required.
To select the right seal, keep in mind the shaft diameter, rotation speed, working temperature and type of lubricant. Mounting must be done with suitable tools to avoid damaging the lip. It is essential to lubricate the lip before installing and to verify alignment between shaft and housing. Poor sealing can cause leaks and premature failures in bearings and gears.
Regarding equivalences, SKF HMS V series seals can be interchanged with products from other brands that meet the same dimensions and specifications. Always verify that the lip material and spring are compatible with the fluid and operating temperature.
If you need an SKF HMS V series radial shaft seal, send the complete code on WhatsApp to MR Accesorios Industriales. We will quote you shortly and help you find the right part for your equipment.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the HMS V designation mean in SKF seals?
- HMS V is an SKF radial shaft seal series. The HMS5 suffix indicates the lip type and material, while V1 indicates a specific variant. The preceding numeric code corresponds to the dimensions in millimeters of bore, outside diameter and width.
- How do I choose the right radial shaft seal for my equipment?
- You need to know the shaft diameter, rotation speed, temperature and lubricant. With that data, you select the seal that meets the dimensions and compatible material. If you have doubts, ask us with the measurement and we will advise you.
- Are SKF HMS V series seals interchangeable with other brands?
- Yes, as long as the dimensions and the material and spring specifications match. Verify chemical and thermal compatibility. If you need help, send us the code and we will confirm the equivalence with no obligation.