SKF 7X16X7 HMSA10 V1 radial shaft seal

SKF 7X16X7 HMSA10 V1 is a reference of radial shaft seal, within Seals. Request a quote for 7X16X7 HMSA10 V1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF HMSA10 V radial shaft seals are single-lip seals with a spring, designed for rotating shafts. Their function is to retain lubricant and exclude contaminants in gearboxes, pumps, electric motors and reducers. MR Accesorios Industriales sells this brand so you can solve your equipment's sealing with a component of proven quality. If you need help identifying the right seal, our technical team is here to help you.

The designation of these seals combines dimensions and suffixes. For example, 7X16X7 HMSA10 V1 indicates a seal with a 7 mm inner diameter, 16 mm outer diameter and 7 mm width. The code HMSA10 identifies the series, with a single sealing lip and spring. The final V indicates the elastomer variant, generally nitrile rubber (NBR), suitable for moderate temperatures and mineral oils. Other examples such as 10X19X7 HMSA10 V1 or 70X90X7 HMSA10 V1 follow the same logic: first the dimensions, then the series and the variant. Knowing this structure lets you order the correct replacement without ambiguity.

These seals are used in a wide variety of industrial equipment in Argentina: reducers and electric motors in food plants, centrifugal pumps in the chemical sector, transmission shafts in the automotive industry and agricultural machinery. They are also found in mining, where dust and water demand robust sealing. Their spring-loaded design ensures uniform contact on the shaft, compensating for small misalignments and wear. In environments with vibrations or moderate speeds, the HMSA10 V series offers an effective barrier against leaks and particles.

To select the right seal, verify the housing and shaft dimensions, the type of lubricant and the temperature conditions. Assembly requires absolute cleanliness: any burr or dirt can damage the lip and cause leaks. Lubricate the lip with the same oil as the equipment before inserting it, and use a mounting tool to avoid twisting. The alignment between shaft and housing must be precise; excessive eccentricity accelerates wear. If the shaft shows wear, consider a repair sleeve. These practices extend the seal's service life and reduce unplanned downtime.

As for equivalents, SKF HMSA10 V seals can be interchanged with products from other brands that follow the same dimensional designation and lip type. Always verify that the elastomer material and the spring are compatible with the operating fluid and temperature. If you have doubts, ask us with the original brand and part number of the equipment. At MR Accesorios Industriales we advise you so the replacement is safe and effective.

To get a quote for the seal you need, send us the full part number on WhatsApp. If you don't have it at hand, send us the shaft and housing dimensions and the type of application. Our technical team replies with the right option.