Industrial pulley 500 mm, 8 grooves, section C

EMMAR POLEA 500 8C is a pulleys reference, within Power transmission. Request a quote for POLEA 500 8C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 500 8C pulley is a V-belt drive pulley, manufactured by EMMAR Accesorios Industriales. It has a 500 mm diameter and 8 grooves for section C belts. It is used to transmit power from a motor to a driven shaft, for example in mills, mixers, compressors or conveyor belts. As it is of in-house manufacturing, the bore, keyway and fastening system can be machined according to the equipment's needs.

This item is a pulley of 500 mm diameter, with 8 grooves and section C. The designation POLEA 500 8C summarizes those three variables: size, number of grooves and belt type. Section C corresponds to wide-profile V-belts, suitable for transmitting high power at moderate transmission ratios. As it is in-house manufacturing, EMMAR brand, the pulley is produced in the factory with dimensional control over the outer diameter, the grooves and the central bore.

The typical applications of a pulley of this size and number of grooves are in large equipment: hammer mills, horizontal mixers, screw compressors, screens, conveyor belts and industrial fans. In all cases the aim is to transmit torque from an electric motor or a gearbox to the working shaft, with the possibility of regulating speed by changing the diameter of the driving pulley or the number of grooves in use.

To mount a 500 mm pulley with 8 grooves, alignment between pulleys, belt tension and the condition of the grooves must be verified. Selection is defined by the power to be transmitted, the shaft RPM and the pitch diameter. The bore diameter, hub length and type of fastening must also be taken into account: keyway, taper bushing or set screw. If the shaft has a standardized diameter, it is best to confirm it before machining.

If you need an equivalent pulley or a nearby size, send the part number POLEA 500 8C by WhatsApp to MR Accesorios Industriales. We can manufacture the same pulley with another diameter, another number of grooves or a different section, and also adapt the bore and keyway to your shaft. For that we need you to send us the shaft diameter, the hub length and the belt type you will use.

At MR Accesorios Industriales we have been manufacturing pulleys, split plummer block housings and ANSI chains for more than 80 years. If your equipment needs a 500 mm pulley with 8 grooves, section C, write to us on WhatsApp with the part number POLEA 500 8C and we will send you the quote. We can also advise you on the most suitable number of grooves and diameter for your drive.