Industrial pulley 500 mm, 6 grooves, section C

EMMAR POLEA 500 6C is a pulleys reference, within Power transmission. Request a quote for POLEA 500 6C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

This industrial pulley with a 500 mm diameter and 6 grooves for section C belts is a power transmission part manufactured by MR Accesorios Industriales. It is used to build or replace V-belt drive systems in equipment that needs to move a lot of power on a single shaft, such as mills, mixers, compressors or large pumps. Because it is in-house manufactured, machining and balancing variants can be requested depending on the application.

The 500 6C pulley has a 500 mm diameter, 6 grooves and section C. It is a large-diameter, multi-groove pulley designed to transmit high torque from a drive shaft to a driven shaft using section C V-belts. The multiple grooves allow the load to be distributed among several belts, which reduces the stress on each one and improves drive continuity. It is manufactured at MR and machined according to the type of bushing or bore required by the equipment.

These pulleys are found in drives for mills, mixers, screens, screw compressors, large centrifugal pumps and industrial fans. They are also used in transmission lines where speed must be reduced and torque increased, or where space makes it necessary to handle everything with a single pair of pulleys. In food, chemical, cement and aggregate processing plants they are common due to the robustness required by continuous operation.

To properly select a pulley of this type, you must verify the pitch diameter, the number of grooves, the belt section and the type of bore or bushing. It is also advisable to check the alignment between pulleys, belt tension and balancing, especially at large diameters and high speeds. If the pulley is mounted on a keyed shaft, the fit tolerances must be respected to avoid vibration and premature wear.

If you need a nearby size, a different number of grooves or a pulley with a different type of bore, send us the equipment data: diameter, grooves, section, shaft diameter and mounting type. With that we check whether there is a variant within the in-house manufacturing line or whether it is better to machine a custom pulley. We can also evaluate the replacement of an existing pulley by taking measurements from the drawing or from the part.

To request a quote for this pulley or an equivalent one, write to us on WhatsApp with the part number POLEA 500 6C and tell us what equipment you are building or repairing. If you have doubts about the section or the number of grooves, send a photo of the old pulley and the shaft measurements. At MR Accesorios Industriales we reply with the alternative that best fits your drive.