Double sprocket with hub, pitch 3/4", 36 teeth

MR Piñón doble 3/4" Z36 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 3/4" Z36 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 3/4" Z36 is a power transmission component supplied by MR Accesorios Industriales. It is used to transmit motion between parallel shafts by means of a 3/4" pitch chain, and its double-row design with hub allows it to be mounted on a shaft and couple two chains simultaneously. It is machined in SAE 1045 steel, which gives it adequate strength for continuous service in demanding industrial environments.

This item is a double sprocket with hub, 3/4" pitch and 36 teeth (z=36). The material is SAE 1045 steel. The double-row configuration with central hub makes it easier to mount on shafts and align two chain strands. The full designation is Double sprocket 3/4" Z36, and it corresponds to the 3/4" pitch series that MR supplies. As a product that MR provides, the tolerances and the steel treatment are controlled to ensure even meshing with the chain.

It is used in 3/4" pitch chain drive lines, especially where pulling capacity must be doubled or two motions must be synchronized from a single shaft. It is common in conveyors, elevators, packaging machines, woodworking equipment and movement systems in industrial plants. It is also used in gearboxes and mechanisms where the mounting space requires a robust hub and two aligned toothed rings.

To select it, verify that the chain pitch matches 3/4" and that the number of teeth (36) is suitable for the desired transmission ratio. Check the shaft diameter and the hub fastening system (keyway, set screws or taper bushing, as applicable). It is important to check the alignment between sprocket and chain, and to maintain correct lubrication to avoid premature wear. If space allows, a higher number of teeth reduces the load on the chain.

If you need a sprocket with a different number of teeth, another pitch or a single instead of double configuration, we can source an equivalent alternative for you. To do so, send us the part number MR-PINON-DOBLE-3-4-Z36 or the full designation via WhatsApp, together with the chain and shaft data. That way we can provide a quote tailored to what you need.

At MR Accesorios Industriales we supply this type of sprocket and have more than 80 years of experience in power transmission. If you have doubts about the size or want to confirm a variant, write to us on WhatsApp and we will advise you. Send the part number or the item designation and we will reply promptly.