Double sprocket with hub, pitch 3/4", 34 teeth

MR Piñón doble 3/4" Z34 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 3/4" Z34 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 3/4" Z34 is a chain wheel supplied by MR Accesorios Industriales, designed to transmit motion in 3/4" pitch chains. It has 34 teeth and a hub, and is machined in SAE 1045 steel. It is used in conveyors, elevators and machines where two chains must be driven in parallel on the same shaft. If you need to replace it or build a new drive, send us the part number and we will quote it.

This item is a double sprocket with hub, 3/4" pitch and 34 teeth (Z34). The double toothing allows two chains to be mounted on the same part, aligned and separated according to the hub width. It is made of SAE 1045 steel, a material suitable for machining and subsequent heat treatment if the application requires it. The commercial designation is Double sprocket 3/4" Z34 and it belongs to MR's power transmission line.

Typical applications of a double sprocket with 3/4" pitch and 34 teeth appear in chain conveyors, bucket elevators, assembly lines and machines where two synchronized chain strands are needed. It is also used in material handling equipment and in low and medium speed drives. Because it has a hub, it can be mounted on shafts with a keyway and secured with set screws or bolts, depending on the equipment design.

To select this sprocket properly, take into account the chain pitch (3/4"), the number of teeth (34) and the shaft diameter where it is mounted. Check that the toothing matches the chain you already have and that the hub has enough space for both strands. If the drive works with variable loads, it is advisable to check alignment and lubrication before mounting. If you need a special heat treatment, ask us before requesting a quote.

If this sprocket is not exactly the one you are looking for, we can offer you a nearby size or an equivalent. For that we need you to send us the current part number, the number of teeth, the pitch and, if possible, a drawing or a photo of the part. We can also evaluate variants in the number of teeth or in the type of hub. The idea is for you to get the part your machine needs, not an approximate one.

To request a quote for this double sprocket 3/4" Z34, send the part number MR-PINON-DOBLE-3-4-Z34 via WhatsApp to MR Accesorios Industriales. If you have questions about the size or want to ask about a variant, write to us and we will reply with the data you need to decide. We supply products and have more than 80 years of experience in power transmission.