Double sprocket with hub, pitch 3/4", 32 teeth

MR Piñón doble 3/4" Z32 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 3/4" Z32 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 3/4" Z32 is a chain drive sprocket with two toothed rings and a central hub, supplied by MR in SAE 1045 steel. It is used to drive two chains in parallel from a single shaft, or to duplicate the output of a gearbox. Its 3/4" pitch and 32 teeth place it in the medium-duty drive range. If you need to replace it or build a new assembly, send us the part number and we'll quote it.

This item is a double sprocket with hub, 3/4" pitch, 32 teeth, machined in SAE 1045 steel. The double designation means it has two toothed rings on a single body, with a central hub that mounts on the shaft. The 3/4" pitch defines the chain it meshes with; the 32 teeth determine the drive ratio. MR supplies it, so the tooth profile and hub meet our dimensional control.

It is found in chain conveyors, bucket elevators, assembly lines and agricultural machinery where two strands must be synchronized. Also in gearboxes and transmission cases that need a double output. Being a sprocket with hub, it is fixed to the shaft with a key and screw, or with a set screw depending on the equipment design. It is a wear part: it is advisable to check the tooth profile and concentricity during maintenance.

To select it, verify that the chain pitch matches the 3/4" and that the 32 teeth give the ratio your machine needs. Check the shaft diameter and hub length before mounting. The alignment between sprocket and chain must be square to avoid uneven wear. If the original equipment comes with a different number of teeth, a neighboring size within the same 3/4" pitch series can be evaluated.

If you can't find the exact part number or need an equivalent, send us the data of the original sprocket: pitch, number of teeth, shaft diameter and hub type. With that we look for the closest size within our supplied line. We can also analyze material or treatment variants if the use is demanding. The idea is that you don't end up with the machine stopped for a power transmission part.

To request a quote for this double sprocket 3/4" Z32, send the part number MR-PINON-DOBLE-3-4-Z32 by WhatsApp to MR Accesorios Industriales. If you have doubts about the size, attach a photo of the old part or the assembly and we'll review it. We handle technical inquiries from distributors, workshops and industrial plants.