Double sprocket with hub, pitch 3/4", 38 teeth

MR Piñón doble 3/4" Z38 is a reference of sprockets and gears, within Power transmission. Request a quote for Piñón doble 3/4" Z38 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The double sprocket 3/4" Z38 is a chain drive sprocket with two tooth rings and a central hub, supplied by MR in SAE 1045 steel. It is used to transmit motion between parallel shafts in industrial equipment, allowing two ratios or two chains on a single body. Its 3/4" pitch and 38 teeth place it in the medium-to-heavy duty drive range.

This item is a double sprocket with hub, 3/4" pitch and 38 teeth, machined in SAE 1045 steel. The commercial designation is Double sprocket 3/4" Z38 and it belongs to the 3/4" pitch series. The design includes two tooth rings integral with a central hub, which allows mounting two chains or duplicating the drive on a single shaft. The SAE 1045 material provides mechanical strength and suitability for surface hardening of the teeth.

Typical applications of a 3/4" pitch double sprocket with 38 teeth are found in chain drives of agricultural machinery, conveyors, chain elevators, material handling equipment and process lines. It is also used in gear reducers and transmission boxes where an additional ratio is needed without adding an extra shaft. In all cases, verify that the chain is of the same pitch and that the number of teeth is compatible with the rest of the system.

To correctly select this sprocket, take into account the chain pitch (3/4"), the number of teeth (38) and the shaft diameter where it is mounted. The hub must accommodate the shaft with the proper fit and the fastening system (key, set screw or taper bushing) must be provided for. Check the alignment between sprockets and the chain tension: a misaligned mounting accelerates wear on the teeth and the chain. If the sprocket runs at high speeds, check the balancing.

If you need an equivalent, the most practical approach is to send us the part number MR-PINON-DOBLE-3-4-Z38 or the data of the original sprocket: pitch, number of teeth, hub diameter and fastening type. With that data we can confirm whether there is another size in the same line or a compatible alternative. We can also evaluate replacement with a single sprocket with hub if the application allows it.

To request a quote for this double sprocket 3/4" Z38, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about compatibility with your chain or mounting on the shaft, attach a photo or a sketch with the main dimensions. That way we can reply with the alternative that best fits your equipment.