Product page
Flange bearing 2 holes LINK-BELT FX3S2B08E
- Manufacturer Part Number
- FX3S2B08E
- Brand
- LINK-BELTOfficial brand
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT FX3S2B08E is a flange bearing 2 holes reference, within Bearing housings. Request a quote for FX3S2B08E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The Link-Belt series 200 2-bolt flange bracket is a mounted bearing ready to be fastened to a flat surface. It is used when the shaft must be perpendicular to the mounting plane and the load acts radially. MR Accesorios Industriales supplies this line for power transmission and conveying equipment in Buenos Aires, Argentina.
The series designation is read in blocks: FX indicates the flange bracket type, S the mounting and B the shaft diameter. The example FX3S2B08E shows the logic: the number before the S defines the housing size, the one after the B the shaft diameter and the final E a sealing variant. With that part number, each size of series 200 is identified unambiguously.
These brackets appear in belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. In Argentina they are found in equipment where the drive shaft is fastened to the side structure and a rigid, easily replaceable support is needed. The two-bolt flange simplifies mounting on folded sheet metal or steel profiles.
To select the bracket, start from the shaft diameter and the type of load: predominantly radial, with some axial depending on the internal bearing. Check the alignment of the flange with the shaft before tightening the bolts, because a twisted flange accelerates seal wear. Lubrication is done through the housing channel; use the grease indicated for the working temperature and do not mix different bases.
As for interchangeability, series 200 2-bolt flange brackets cross between manufacturers by shaft diameter and hole spacing, but the sealing, the inner ring locking system and the housing change. Always compare those three variables before replacing one brand with another. If mounting space is tight, the overall height of the bracket also determines whether it fits or not.
Send the full part number on WhatsApp to MR Accesorios Industriales and we will quote it for you. If you need a sealing variant or a different shaft diameter within series 200, write to us with the model and we will indicate the compatible alternative. We also manufacture custom split plummer block housings for non-standard equipment.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 1/2 in
Frequently Asked Questions
- How do I identify the bracket I need?
- Send the full part number, for example FX3S2B08E. There you can read the flange type, the housing size, the shaft diameter and the sealing variant. With that information we quote the exact reference or its compatible equivalent.
- Can it be replaced by another brand?
- Yes, if the shaft diameter, hole spacing and mounting height match. The sealing and the inner ring locking system may vary between manufacturers, so it is advisable to compare those points before installing.
- What lubrication does this bracket take?
- General-purpose bearing grease, applied through the housing channel. Follow the working temperature of the equipment and do not mix greases with different bases. If the environment has moisture or dust, choose a reinforced sealing variant.