Flange bearing 4 holes LINK-BELT FC4U2M55N

LINK-BELT FC4U2M55N is a flange bearing 4 holes reference, within Bearing housings. Request a quote for FC4U2M55N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series 4-bolt flange bearing housing is a mounted bearing that fastens to the structure with four bolts, with the shaft passing through perpendicular to the flange. It is used to support drive shafts in equipment that requires rigid fastening and a compact mounting, such as conveyor belts, elevators, mixers and process machinery. MR Accesorios Industriales carries this line as an official brand.

The designation of these housings combines letters and numbers that identify the housing type, the bearing series and the shaft locking system. In the 200 series, the code starts with the letters FC, which correspond to the 4-bolt flange housing; these are followed by digits that indicate the nominal shaft diameter and sealing or locking variants. One specific example is FC4U2M55N, where the 200 series and the shaft size can be read. To interpret each code, MR advises you on WhatsApp.

These housings are used in the food, cement, mining, grain and aggregate industries, among others. In Argentina they are commonly found in belt conveyors, bucket elevators, mixers, mills and process equipment where the shaft must be supported on a flat flange. The LINK-BELT 200 series is one of the most widespread for these applications due to its ratio between load capacity and size.

To select the correct housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in environments with dust, moisture or frequent washdowns, it is best to choose variants with reinforced seals. Mounting requires the flange to sit flat and the four bolts to be tightened evenly to prevent deformation. Lubrication must be renewed according to the duty cycle and the type of grease.

LINK-BELT 200 series flange housings can be interchanged with equivalent products from other brands that follow the same mounting standard and flange dimensions. It is essential to verify the shaft diameter, the hole spacing and the locking type before replacing one housing with another. MR Accesorios Industriales tells you the compatible alternative if you cannot find the exact code.

If you need a flange housing for your equipment, send the code or the shaft dimensions by WhatsApp to MR Accesorios Industriales. We will quote you promptly and help you choose the variant that best suits your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.