Flange bearing 4 holes LINK-BELT FC4U232N

LINK-BELT FC4U232N is a flange bearing 4 holes reference, within Bearing housings. Request a quote for FC4U232N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series 4-bolt flange bearing housing is a mounted bearing with a flange housing, designed to fasten rotating shafts to a flat surface with four anchoring points. It is used when a rigid, centered connection is required, with the flange resting on sheet metal or cast iron. MR Accesorios Industriales carries this line as an official brand and advises you to choose the correct configuration according to the shaft, the load and the working environment.

The designation of these housings is read in blocks: the initial letters indicate the housing type and the flange, the number that follows defines the bearing series and the final letters describe sealing, locking or material variants. In the 200 series, for example, a reference such as FC4U232N combines the 4-bolt flange housing with the 200 series bearing and a suffix that identifies the assembly's execution. Understanding that logic allows you to order the exact replacement or the variant that best suits your machine.

These housings are seen in belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. In Argentina they are common in sugar mills, water treatment plants and poultry facilities, where frequent washdowns require protected housings. The 4-bolt flange allows mounting on folded sheet metal structures or welded supports, keeping the shaft perpendicular to the mounting surface.

To select well, look at the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. If there is dust, water or pressure washing, a version with reinforced sealing is advisable; if the shaft operates with misalignment, consider a housing with self-aligning clearance. During mounting, verify that the flange sits evenly, tighten the four bolts in a cross pattern and lubricate according to the bearing type and the working temperature. Careful alignment extends the life of the assembly.

Interchangeability between brands of mounted housings depends on the flange dimensions, the shaft diameter and the locking type. Many equivalent series share standardized dimensions, but the seals, tolerances and housing materials may vary. Therefore, before replacing a LINK-BELT reference with another brand, it is advisable to compare the mounting drawing and the service conditions. MR Accesorios Industriales tells you the compatible alternative when you cannot find the original code.

If you have the housing code at hand, send it by WhatsApp to MR Accesorios Industriales and we will quote you promptly. We can also help you identify the reference from a photo or from the shaft and flange dimensions. We work with the LINK-BELT line as an official brand that MR carries and with equivalent alternatives so that your equipment keeps running without hassle.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.