Pillow block bearing DODGE P2B-SXR-20M

DODGE P2B-SXR-20M is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SXR-20M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXR Y-bearing pillow block is a mounted bearing unit: a unit that combines a cast iron housing with an insert ball bearing, already assembled and aligned at the factory. It is used to support rotating shafts in equipment where rigidity, good sealing and simple mounting are required, without machining housings or assembling the unit piece by piece. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The SXR series designation is read in blocks. The P2B prefix indicates the two-bolt pillow block housing, followed by the shaft size. The SXR block identifies the insert family and its sealing system. The numeric suffix with a final M corresponds to the nominal shaft size: P2B-SXR-17M, P2B-SXR-20M, P2B-SXR-25M, P2B-SXR-30M, P2B-SXR-35M, P2B-SXR-40M, P2B-SXR-45M and P2B-SXR-50M are the part numbers in the series. By providing the complete code, identification is straightforward.

These pillow blocks appear in belt conveyors, bucket elevators, screens, mixers, mills, centrifugal pumps and fans. In food plants, cement plants, grain facilities, meat processing plants and textile facilities in Argentina they are chosen for the combination of a rigid housing and an insert bearing, which simplifies shaft replacement and absorbs minor misalignments. They are also used in water treatment equipment and in packaging lines where washing and cleaning are frequent.

To select correctly, look at the shaft diameter, the expected radial and axial load, and the working environment. The insert seal defines how much dust, water or steam the unit tolerates: in humid environments or with washing, the version with a reinforced seal is preferable. During mounting, rest the housing on a flat, rigid surface, tighten the fastening bolts in a cross pattern and check shaft alignment before applying final torque. Lubricate according to the duty cycle and check the insert clearance in the housing.

Cross-brand equivalences are resolved by shaft size, housing type and sealing system, not by the commercial code. A two-bolt pillow block with an insert of the same size can be interchanged between manufacturers, but center height, hole spacing, hole diameter and insert locking type must be compared. If the original equipment carries another brand, send us the code and dimensions and we will indicate the compatible alternative.

If you need to replace a Y-bearing pillow block, send the complete code via WhatsApp to MR Accesorios Industriales. With the P2B-SXR reference and the shaft size we will quote the unit and, if the equipment requires another configuration, we will indicate the best-suited alternative. We can also review the mounting and sealing so the unit lasts as long as it should.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.