DODGE P2B-SXR-17M-FF pillow block bearing

DODGE P2B-SXR-17M-FF is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SXR-17M-FF via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SXR pillow block is a mounted pillow block unit: a unit that combines a cast iron housing with an insert ball bearing, either fixed or self-aligning. It is used to support rotating shafts in equipment where a solid base and simple mounting are required, such as conveyor belts, mixers, fans and process machinery. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, and advises you on choosing the correct configuration for your application.

The SXR series designation is read in blocks: the letter P indicates pillow block, the number that follows defines the shaft diameter, and the letters B and SXR correspond to the housing family and the insert type. The suffix FF indicates the sealing, and the final M identifies the mounting variant. For example, P2B-SXR-17M-FF is an SXR series pillow block for a 17 mm shaft, with FF sealing and M configuration. Knowing this logic lets you order the complete part number and avoid confusion when replacing a unit.

In Argentine industry, pillow blocks with insert bearings are seen in belt conveyors, bucket elevators, mills, screens, centrifugal pumps and water treatment equipment. They also appear in food, chemical and cement plants, where the environment may be humid or dusty. The DODGE SXR series is designed for these conditions: the cast iron housing and the ball insert provide robust support and allow some initial misalignment without sacrificing operation.

To select the correct pillow block, take into account the shaft diameter, the type of load (radial, axial or combined), the rotation speed and the environmental conditions. The FF sealing protects against dust and moisture, but if there are frequent washdowns or exposure to liquids, it is advisable to evaluate additional seals or a suitable lubricant. During mounting, check the alignment of the base and the tightening of the bolts; poor alignment accelerates insert wear. Lubrication must follow the manufacturer's recommendations and be renewed according to the duty cycle.

If you need to replace an existing unit, the most practical approach is to identify the part number stamped on the housing or on the insert. Insert bearing pillow block series often have cross-references between brands, but the mounting dimensions, the center height and the shaft diameter must match for a direct swap. MR Accesorios Industriales can point you to the compatible alternative within the brands it sells.

To request a quote for your DODGE SXR series pillow block, send us on WhatsApp the complete part number shown on the part, for example P2B-SXR-17M-FF, or a photo of the identification plate. With that information we send you the quote and confirm availability of the variant you need. If you are looking for another size or a pillow block with special features, write to us and we will help you find the best option for your equipment.