DODGE P2B-SXR-20M-NL pillow block bearing

DODGE P2B-SXR-20M-NL is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-SXR-20M-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

DODGE P2B-SXR series pillow block bearings are units that combine a bearing and its housing in a single assembly. This type includes part numbers such as P2B-SXR-17M-NL, P2B-SXR-45M-NL and P2B-SXR-75M-NL. The number followed by M identifies the shaft size and changes with each part number.

The pillow block has a base with mounting holes and rests on a surface parallel to the shaft, such as a beam, a machine table or a frame. It is the most common configuration when there is a mounting surface below the shaft. A mounted unit arrives as an assembly, which simplifies installation and replacement compared with assembling the bearing and housing separately.

Part numbers of this type have the format P2B-SXR, a number followed by the letter M (17M, 20M, 45M, 60M, 75M, among others) and the -NL suffix. The number identifies the shaft size and changes with each unit; the -NL suffix distinguishes this version and must be specified. Other units in the same series without that suffix are different part numbers.

Before deciding, confirm the shaft diameter, the mounting hole spacing and the clearance around the unit. Load, rotation speed and ambient conditions also matter. With that data, choosing the correct part number is straightforward.

Install the unit on a flat, rigid, clean mounting surface, and check alignment with the shaft before final tightening. Tighten the bolts evenly and follow the torque values specified by the manufacturer. Poor support or a misaligned shaft reduce bearing service life.

To request a quote, send us the full part number by WhatsApp or email, such as P2B-SXR-45M-NL, along with the quantity you need. A photo of the installed unit helps confirm. We reply promptly, from Buenos Aires, Argentina.