DODGE F2B-DL-111 flange bearing 2 holes

DODGE F2B-DL-111 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-DL-111 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE DL series Y-bearing insert unit is a 2-bolt flange mounted bearing, designed to secure rotating shafts to flat structures. It is used in equipment where a compact, self-aligning and easy-to-mount unit is needed, such as conveyor belts, fans, mixers and agricultural machinery. Its D-Lok locking system simplifies start-up and reduces maintenance times. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with technical advice to choose the correct size.

The DL series designation is read in blocks: the letter F indicates the flange housing type, the number that follows defines the number of mounting holes, and B indicates that it is a flange unit with an insert bearing. The DL suffix corresponds to the D-Lok locking system, which secures the insert to the shaft using set screws. Examples such as F2B-DL-012, F2B-DL-014 or F2B-DL-100 show how the code changes according to shaft size: the final two or three digits identify the nominal diameter in inches or millimeters, depending on the series. Knowing this structure allows you to order the exact replacement without ambiguity.

In Argentine industry, these units appear in belt conveyors, bucket elevators, blowers, centrifugal pumps and process equipment. They are also found in food plants, cement plants, tanneries and metalworking shops, where the 2-bolt flange makes mounting on folded sheet metal or profile structures easier. The DODGE DL series is a common option when looking for a robust unit with simple maintenance, with good resistance to contamination and moderate radial loads.

To select the correct unit, take into account the shaft diameter, the expected radial and axial load, and the environmental conditions. The insert seal protects against dust and moisture; in environments with a lot of dirt or frequent washdowns, it is advisable to check the type of seal. The D-Lok system allows the insert to be adjusted on the shaft with an Allen key, but it is key to align the flange before tightening the screws to avoid parasitic stresses. Factory lubrication is usually sufficient for the service life, although in severe applications it may require periodic relubrication.

Flange mounted bearings have equivalents between brands: it is common to find units with similar mounting dimensions from other manufacturers, but the codes and locking systems may vary. Therefore, when looking for a replacement, do not rely only on the code: compare the shaft diameter, the hole spacing and the insert type. At MR Accesorios Industriales we tell you the alternative compatible with your application and send you a quote for the DODGE option that best suits you.

If you already have the code for your DODGE DL series unit, send it on WhatsApp along with a photo of the installation and the shaft dimensions. That way we'll send you a quote shortly and advise you on installation or the alternative if you need another configuration. We can also evaluate special applications with split plummer block housings or in-house manufacturing according to your requirement.