Flange bearing 2 holes DODGE F2B-DL-112

DODGE F2B-DL-112 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DL-112 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DL series Y-bearing housing with insert bearing is a 2-bolt flange mounted bearing unit, designed to secure rotating shafts to flat structures. It is used in equipment that requires a compact, self-aligning and easy-to-mount unit, such as conveyor belts, fans, mixers and agricultural machinery. Its D-Lok locking system simplifies commissioning and reduces maintenance times. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the right size.

The DL series designation is read in blocks: the letter F indicates the flange housing type, the number that follows —2, 3 or 4— defines the number of mounting holes, and B indicates that it is a flange unit with insert bearing. The suffix DL corresponds to the D-Lok locking system, which secures the insert to the shaft by means of set screws. Examples such as F2B-DL-012, F2B-DL-014 or F2B-DL-100 show how the code changes according to shaft size: the final two or three digits identify the nominal diameter in inches or millimeters, depending on the series. Knowing this structure allows you to order the exact replacement without ambiguity.

In Argentine industry, these housings appear in belt conveyors, bucket elevators, blowers, centrifugal pumps and process equipment. They are also found in food plants, cement plants, tanneries and metalworking shops, where the 2-bolt flange makes mounting onto folded sheet metal or profile structures easier. The DODGE DL series is a common choice when a robust unit with simple maintenance is required, with good resistance to contamination and moderate radial loads.

To select the correct housing, take into account the shaft diameter, the expected radial and axial load, and the environmental conditions. The insert seal protects against dust and moisture; in environments with a lot of dirt or frequent washdowns, it is advisable to verify the type of seal. The D-Lok system allows the insert to be adjusted onto the shaft with an Allen key, but it is key to align the flange before tightening the screws to avoid parasitic stresses. Factory lubrication is usually sufficient for the service life, although in severe applications it may require periodic relubrication.

Flange mounted bearing units have cross-brand equivalents: it is common to find units with similar mounting dimensions from other manufacturers, but the codes and locking systems may vary. Therefore, when looking for a replacement, do not rely only on the code: compare the shaft diameter, the distance between holes and the type of insert. At MR Accesorios Industriales we indicate the alternative compatible with your application and quote the DODGE option that best suits you.

If you already have the code of your DODGE DL series housing, send it by WhatsApp along with a photo of the mounting and the shaft dimensions. That way we can quote you promptly and advise you on the mounting or the alternative if you need another configuration. We can also evaluate special applications with split plummer block housings or in-house manufacturing according to your requirement.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.