Product page
Flange bearing 2 holes DODGE F2B-DL-110L-NL
- Manufacturer Part Number
- F2B-DL-110L-NL
- Brand
- DODGEOfficial brand
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-DL-110L-NL is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DL-110L-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DODGE D-Lok series Y-bearing with insert bearing is a 2-bolt flange mounted bearing, designed to secure rotating shafts to a structure and absorb moderate radial and axial loads. It is used in equipment where the mounting must be compact and allow quick shaft installation and removal. MR Accesorios Industriales supplies this line as an official brand, with technical advice to choose the correct configuration according to shaft diameter and locking type.
The D-Lok series designation is read in blocks: the letter F indicates the flange housing type, the number that follows defines the nominal shaft diameter, and the letters B-DL identify the 2-bolt flange with D-Lok series insert bearing. The final suffix L indicates the eccentric locking position, and NL indicates that the insert has no pre-lubrication. For example, F2B-DL-110L-NL corresponds to a 2-bolt flange housing for a 1.1/16" shaft with D-Lok locking and no initial lubricant.
In Argentine industry, these housings appear in belt conveyors, packaging lines, mills, mixers and continuous process equipment. They are also found in industrial fans, centrifugal pumps and machine tools where a 2-bolt mounting flange is needed to fasten to sheet metal or structure. The D-Lok series is common in applications with shafts that require quick adjustment and frequent removal, and in equipment where mounting space is limited.
To select the housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; in environments with washdown or fine particles, it is advisable to verify the seal type. The D-Lok locking is adjusted with an eccentric screw that secures the inner ring to the shaft; it is important to align the flange and tighten to the recommended torque to prevent slipping. Lubrication must be suitable for the working temperature, and the bearing internal clearance must remain free to allow thermal expansion.
DODGE D-Lok series housings are interchangeable with other brands of 2-bolt flange mounted bearings that follow the same mounting standard and flange dimensions. When requesting a quote, it is advisable to compare shaft diameter, flange hole spacing and locking type. MR Accesorios Industriales can indicate the compatible alternative if the original part number is not available, or manufacture the housing to measure if the application requires it.
If you need to replace a DODGE D-Lok series Y-bearing with insert bearing, send the complete part number by WhatsApp to MR Accesorios Industriales. We will quote you promptly and advise you on the configuration that best suits your equipment. You can also inquire about other brands or sizes within the bearing housing line.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 1-5/8 in
Frequently Asked Questions
- What does the designation F2B-DL-110L-NL mean?
- The F indicates 2-bolt flange, 2B the housing type, DL the D-Lok series, 110 the shaft diameter in inches (1.1/16"), L the eccentric locking and NL that the insert has no pre-lubrication. It is a code that identifies dimensions and configuration.
- How do I know if this housing is compatible with my equipment?
- Check the shaft diameter, the distance between the flange holes and the insert locking type. If you have the original part number, send it by WhatsApp and we will indicate the equivalent or the alternative that best suits your application.
- What lubrication does the D-Lok insert bearing use?
- The insert accepts general-purpose bearing grease. The choice depends on temperature and environment: for high temperatures or humidity, a specific grease is recommended. The NL suffix indicates that it is supplied without lubricant, so it must be greased before start-up.