DBH 9556Vit radial shaft seal — 15 x 32 x 7.5/8.5

DBH 9556Vit is a reference of radial shaft seal, within Seals. Request a quote for 9556Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9556Vit radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 15 mm shaft diameter, 32 mm housing and a height of 7.50/8.50 mm, it is used in gearboxes, pumps, electric motors and transmission equipment to retain lubricant and prevent the entry of dust or water. Its A 231 design combines a sealing lip with a metal body that is press-fitted into the housing.

This DBH 9556Vit oil seal has a shaft diameter of 15 mm, a housing diameter of 32 mm and a height of 7.50/8.50 mm. The A 231 design corresponds to a single-lip seal with a spring, intended for rotating shafts with permanent lubrication. The stepped height allows it to be seated in cavities with a shoulder or in covers that require a deeper seat. The sealing lip runs on the shaft and the outer body maintains concentricity within the housing.

Typical applications for this oil seal include gearboxes, centrifugal pumps, low-power electric motors, spindles and belt- or chain-driven transmission equipment. In all cases, the function is the same: retain the oil or grease inside the assembly and block dust, moisture or particles that could contaminate the lubricant. It is a wear part that should be replaced when a visible leak appears or when the shaft shows a lip mark.

To install this oil seal, check that the shaft has the specified dimension and that the contact surface is clean and free of burrs. Lubricate the lip before inserting it and fit the oil seal with a tool that presses on the outer edge, never on the lip. If the shaft is worn, consider an oil seal with an offset lip. The selection depends on speed, temperature and the type of lubricant; if you do not have that data, contact us and we will help you define the best option.

If you need an equivalent or a different size, send us the part number 9556Vit or the shaft, housing and height measurements. We can also look for an oil seal from another brand or series that performs the same function. At MR Accesorios Industriales we carry seals and oil seals from different lines and can advise you according to the application. Write to us on WhatsApp and we will send you the quote.

MR Accesorios Industriales carries the DBH brand as part of its line of seals and oil seals. If this part number does not exactly match what you need, send us your equipment data and we will help you find the right part. Service is personalized and you can contact us on WhatsApp so we can send you the quote and alternatives.