Radial shaft seal DBH 6015 — 73.03 x 98.45 x 10.40

DBH 6015 is a radial shaft seal reference, within Seals. Request a quote for 6015 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6015 radial shaft seal is a lip seal fitted between a rotating shaft and a fixed housing to contain lubricant and stop the ingress of dust, water or particles. Its A 098 BIDI design works in both directions of rotation, so it is suitable both for equipment that reverses motion and for assemblies where the lip orientation is not defined in advance. It is a wear part: when oil loss or dirt ingress appears, it is replaced.

This item is a DBH radial shaft seal with the following dimensions: shaft diameter 73.03 mm, housing diameter 98.45 mm and height 10.40 mm. The indicated design is A 098 BIDI, that is, a bidirectional seal designed to contain lubricant from both sides of the lip. These are the dimensions you must verify against the shaft and the cavity before ordering: a seal with the wrong inner diameter will not seal, and one with a height outside tolerance will not seat in the housing.

Typical applications for a seal of this size are in equipment with medium-section shafts: gear reducer boxes, pumps, electric motors, mixers, conveyors and process machinery. In all these cases it performs the same function: retaining oil or grease inside the assembly and preventing the entry of contaminants that accelerate wear on bearings and gears. It is also used as a secondary barrier in equipment with frequent splashing or washdown.

To select it properly, in addition to the three dimensions, check the condition of the shaft surface: if it has a groove or wear, the new lip will not seat evenly and you will have leakage again. Also check the housing for burrs or marks, and lubricate the lip before installation. The A 098 BIDI design is advisable when the equipment rotates in both directions or when you cannot guarantee the seal orientation during assembly.

If the code 6015 does not match the one you have, or if you need a nearby size, send us the shaft diameter, housing diameter and height you measured. With those three data points we look for the equivalent in DBH or another brand that MR supplies, and we confirm alternatives. We can also verify the lip design if you send us a photo of the old part or the assembly drawing.

MR Accesorios Industriales supplies the DBH brand and has more than 80 years of experience in bearings, power transmission and seals. If you want to request a quote for the DBH 6015 oil seal or ask about an equivalent size, write to us on WhatsApp with the code and dimensions. We will reply with the option that best suits your equipment.