Radial shaft seal DBH 9488/85 — 23.00 x 34.00 x 6.50

DBH 9488/85 is a radial shaft seal reference, within Seals. Request a quote for 9488/85 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9488/85 radial shaft seal is a lip seal mounted in the housing and sealing against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Due to its compact dimensions, it is used in equipment where axial space is limited and rotation speed is moderate. MR Accesorios Industriales sells this official brand and advises you so you choose the right seal for your application.

This item is a DBH radial shaft seal with designation 9488/85. Its dimensions are 23.00 mm shaft diameter, 34.00 mm housing bore diameter and 6.50 mm height. Design A 219 corresponds to a single-lip configuration with spring, intended for rotating shafts with lubrication. The lip elastomer and the internal spring maintain contact against the shaft, while the outer diameter ensures the fit in the housing. It is a standard replacement part within the line of seals and oil seals.

Typical applications for a 23 x 34 x 6.50 mm seal include small gearboxes, electric motors, centrifugal pumps, gear reducers and power transmission equipment. It is also found in machine tools, washing equipment and irrigation systems where oil or grease must be contained and the entry of contaminants prevented. In all cases, the seal works on a rotating shaft and a fixed housing, and its function is to separate two environments: the lubricated one and the outside.

To select and install this seal, check that the shaft has the right dimensions and surface finish, free of burrs or marks that could damage the lip. The housing must be clean and free of deformation. During installation, lubricate the lip with the same service oil or grease and use an installation tool that presses on the outer diameter, never on the lip. If the shaft shows wear, evaluate a nearby size or a seal with an offset lip. Working speed and temperature determine the choice of lip material.

If you need an equivalent or a nearby size, send us the code 9488/85 or the dimensions 23 x 34 x 6.50 mm via WhatsApp. You can also send us a photo of the part and the dimensions taken with a caliper. At MR Accesorios Industriales we check your request against the manufacturer's data sheet to confirm alternative dimensions within the same series or from other brands we sell. The more data you give us, the faster the response.

To request a quote for the DBH 9488/85 seal, write to us via WhatsApp with the code and the quantity you need. We will reply with the quote and the alternatives, if any. MR Accesorios Industriales works with official brands and in-house manufacturing, and has more than 80 years of experience in the industry. Do not hesitate to ask us about other sizes in the line of seals and oil seals.