Radial shaft seal DBH 9490/85 — 26.00 x 38.00 x 7.00

DBH 9490/85 is a radial shaft seal reference, within Seals. Request a quote for 9490/85 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9490/85 radial shaft seal is a lip seal designed for rotating shafts. With dimensions of 26 mm shaft diameter, 38 mm housing bore and 7 mm height, and A 219 design, it prevents oil or grease leaks and blocks the entry of dust and water. It is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this official brand and advises you on choosing the correct seal for your application.

This item is a radial shaft seal from the DBH brand, designation 9490/85. Its dimensions are shaft (d) 26 mm, housing bore (D) 38 mm and height (h) 7.00 mm, with an A 219 design. The A 219 design corresponds to a single-lipped seal with a spring, intended for rotating shafts where an effective barrier against lubricant leakage and contaminant ingress is required. The sealing lip runs on the shaft and the outer case is press-fitted into the housing bore.

Typical applications for this seal include gearboxes, centrifugal pumps, electric motors, compressors, spindles and power transmission equipment. In all cases, the seal protects the bearings and the lubricant from the external environment. It is commonly found in industrial machinery, process equipment and vehicles where the 26 mm shaft requires reliable sealing at moderate speeds.

To install the seal correctly, check that the shaft has the proper hardness and surface roughness, with no burrs or marks. Lubricate the lip with the same oil or grease used in service before inserting it. The housing bore must be clean and undamaged; place the seal perpendicular to the shaft and press it evenly down to the bottom. If the shaft shows wear, consider a nearby size or a seal with the lip in a different position.

If you need an equivalent seal or a close size, contact us with the code 9490/85 or with your shaft and housing bore dimensions. At MR Accesorios Industriales we can offer you alternatives from other brands or special configurations. We also manufacture housings and other components, and we carry a broad line of seals and oil seals for different applications.

To request a quote for the DBH 9490/85 seal, write to us on WhatsApp and mention the code. We will reply shortly with shipping options. MR Accesorios Industriales has more than 80 years of experience in the industry and helps you find the correct seal for your equipment.