DBH 9487Vit radial shaft seal — 11.9 x 24 x 6

DBH 9487Vit is a reference of radial shaft seal, within Seals. Request a quote for 9487Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9487Vit radial shaft seal is a lip seal mounted on a rotating shaft to retain lubricant and block the entry of dust, water or particles. With an 11.90 mm shaft diameter, 24.00 mm housing and 6.00 mm height, it follows the Lx-R-H designation and is used in gearboxes, pumps, electric motors and transmission equipment. It is a wear part: when the lip hardens or becomes marked, oil loss appears and it should be replaced.

This item is a seal from the DBH line, identified by part number 9487Vit. Its nominal dimensions are 11.90 mm shaft, 24.00 mm housing and 6.00 mm height. The indicated design is Lx-R-H, which describes the lip and case configuration. The sealing lip runs on the shaft and the outer diameter is press-fitted into the housing. The 6.00 mm height defines the width of the housing where the seal fits.

It is used in equipment where a shaft rotates inside a lubricated housing: gearboxes, centrifugal pumps, electric motors, mixers, conveyor belts and machine tools. It also appears in applications exposed to dust or water, where the seal must stop contaminants from entering. In all cases, it is advisable to check the working temperature and the type of lubricant before choosing the lip compound.

To install it, the shaft must be clean, free of burrs and marks, and the housing free of dents. It is recommended to lubricate the lip before inserting it and to use an installation tool that rests on the outer edge, never on the lip. Shaft speed, pressure and the type of fluid affect service life. If the original seal has a different design, an equivalent with the same shaft, housing and height dimensions can be sought.

If you need a replacement, send part number 9487Vit or the dimensions 11.90 x 24.00 x 6.00 mm on WhatsApp to MR Accesorios Industriales. You can also indicate the equipment, the brand of the original seal and a photo of the housing. With that data, the exact size can be quoted. MR sells DBH within its line of seals and shaft seals.

MR Accesorios Industriales manufactures split plummer block housings, ANSI chains and pulleys, in addition to selling bearings, power transmission, seals and lubricants. For this DBH 9487Vit seal, the fastest way is to send the part number on WhatsApp and ask for a quote. An equivalent from another line can be evaluated.