DBH 9462 radial shaft seal — 25.4 x 44.5 x 5

DBH 9462 is a reference of radial shaft seal, within Seals. Request a quote for 9462 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9462 radial shaft seal is a lip seal that mounts between a rotating shaft and a fixed housing to retain lubricant and stop the ingress of dust, water or particles. Its dimensions of 25.40 mm shaft, 44.50 mm housing and 5.00 mm height place it in small-sized transmission equipment and pumps. At MR Accesorios Industriales we sell it and quote it by WhatsApp with your part number.

The DBH 9462 is a seal with Lx design, with a sealing lip and metal body. Its dimensions are 25.40 mm shaft diameter, 44.50 mm housing diameter and 5.00 mm height. That combination of dimensions corresponds to a thin-section seal, intended for reduced axial spaces where a taller seal does not fit. The Lx design defines the geometry of the lip and the reinforcement, so it should be respected when looking for a replacement.

It is used in gearboxes, centrifugal pumps, electric motors, fan shafts and power transmission equipment in general. It also appears in machine tools and in process equipment where an oil bath must be separated from an environment with dust or moisture. As a small-shaft seal, it is common in compact equipment, where the space for the seal is limited by the diameter of the bearing or bushing that shares the same housing.

To install it, verify that the shaft has no burrs, scratches or wear on the sealing track: a new lip on a marked shaft loses effectiveness quickly. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and apply force on the outer ring, never on the lip. The housing must be clean and free of dents. If the previous seal failed, also check the concentricity and shaft play before fitting the new one.

To quote the 9462, send us the part number, the shaft, housing and height dimensions, and a photo of the old seal. With that we look for the equivalent in the same brand or in another with similar characteristics, respecting the Lx design. We can also evaluate variants with an additional lip or a different material depending on the fluid and the working temperature of the equipment.

At MR Accesorios Industriales we sell the DBH brand. If you want to request a quote for the 9462 oil seal or ask about an equivalent, write to us by WhatsApp with the part number and dimensions. We will reply with the corresponding reference and quote terms.