Radial shaft seal DBH 9460 — 68.00 x 85.00 x 8.00

DBH 9460 is a radial shaft seal reference, within Seals. Request a quote for 9460 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9460 radial shaft seal is a lip seal designed to close off the passage of lubricant and prevent the entry of contaminants on rotating shafts. Due to its dimensions —68 mm shaft diameter, 85 mm housing and 8 mm height— it mounts in gearboxes, pumps and medium-size transmission equipment. MR Accesorios Industriales sells this brand and advises you so that you choose the correct seal according to the type of shaft and the working conditions.

This item is a radial shaft seal from the DBH line, identified with part number 9460. Its nominal dimensions are 68 mm shaft diameter (d), 85 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a seal with a single sealing lip and metal body, suitable for rotating shafts with permanent lubrication. The 9460 nomenclature is the commercial designation you will find on the manufacturer's product page and on the product label.

It is used in equipment where oil or grease must be retained and dust, water or particles excluded. It is common in gearboxes, centrifugal pumps, electric motors, conveyor rollers and machine tools. It also appears in agricultural and industrial applications where the shaft rotates at moderate speeds and the temperature does not exceed the limits of the standard elastomer. If the equipment works with a lot of dirt or vibration, it is advisable to evaluate a seal with a dust lip or a more resistant material.

To mount it properly, verify that the shaft diameter is within the recommended tolerance and that the surface has no burrs or marks. The housing must be clean and free of deformation; the seal is inserted with a press and a flat tool that rests on the outer edge, never on the lip. Before installing it, lubricate the lip with the same oil used in the equipment. If the shaft shows wear, you can opt for a seal with an offset lip or a repair sleeve, as long as the dimensions allow it.

If you need a nearby size or an equivalent from another brand, send us part number 9460 or the dimensions 68 x 85 x 8 mm and we will quote you alternatives. We can also look for variants with a double lip, FKM material for high temperatures or an additional spring, depending on what your application requires. MR Accesorios Industriales has more than 80 years in the field and helps you confirm the correct part before buying.

To move forward, send part number 9460 by WhatsApp to MR Accesorios Industriales along with a photo of the old seal or the shaft and housing dimensions. That way we send you the quote with no obligation. If you have doubts about the mounting or the material, ask us and we will advise you.