DBH 9244/85 radial shaft seal — 28 x 41 x 7

DBH 9244/85 is a reference of radial shaft seal, within Seals. Request a quote for 9244/85 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9244/85 radial shaft seal is a lip seal that stops lubricant from escaping and blocks dust, water or particles from entering equipment with a rotating shaft. It is mounted on the 28 mm shaft and inside a 41 mm housing, with a height of 7.00 mm and Lx design. It is a wear part: when the lip hardens or a leak appears, it is replaced. MR Accesorios Industriales sells it.

This seal is identified by its designation 9244/85 and by the dimensions that define its seat: shaft diameter 28 mm, housing diameter 41 mm and height 7.00 mm. The Lx design corresponds to a radial seal with a single lip, with a metal body and elastomer lip, intended for rotating shafts with lubrication. Before installing it, check that these three dimensions match the housing and shaft of your equipment, because a seal with a different height or diameter will not seal the same way.

It is used in reducer boxes, pumps, electric motors, transmission shafts and process equipment where oil or grease must be retained and external contamination avoided. It also appears in agricultural machinery, conveyors and industrial equipment in general. In all these cases it performs the same function: keeping lubricant in and contaminants out, protecting bearings and gears. It is an inexpensive part within the assembly, but its failure can cause downtime and greater damage.

To choose well, in addition to the dimensions, take into account the shaft speed, the working temperature and the type of lubricant. The Lx design is a standard lip configuration, suitable for general applications. When installing, lubricate the lip, seat the seal perpendicular to the shaft and use a tube or press that pushes on the outer diameter, never on the lip. Check that the shaft has no burrs or wear in the contact area, because that shortens the life of the seal.

To quote part number 9244/85, we can look for an equivalent within the same radial shaft seal category. To do that, send us the part number, a photo of the part and the shaft, housing and height dimensions by WhatsApp. With that data we review compatible alternatives. If your equipment accepts another height or a different design, we also evaluate it, always confirming against the manufacturer's data sheet before quoting.

MR Accesorios Industriales sells the DBH brand. If you need this seal or want to ask about another size, write to us on WhatsApp with the part number 9244/85 and we will send you the quote. We can also advise you on installation or the selection of an equivalent seal for your application.