Radial shaft seal DBH 9245Vit — 76.00 x 92.00 x 10.00

DBH 9245Vit is a radial shaft seal reference, within Seals. Request a quote for 9245Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9245Vit radial shaft seal is a lip seal mounted on the shaft and inside the housing to retain oil or grease and prevent the ingress of dust and water. With dimensions of 76 mm shaft diameter, 92 mm housing diameter and 10 mm height, and Lx-R design, it is a common replacement part in gearboxes, pumps and rotating equipment. MR Accesorios Industriales carries it as part of its seals and oil seals line.

This DBH 9245Vit oil seal has a shaft diameter of 76 mm, a housing diameter of 92 mm and a height of 10 mm. Its Lx-R design indicates a configuration with a sealing lip and spring, intended for rotating shafts with lubrication. The 9245Vit designation identifies the size and construction type within the DBH line. It is a sealing component that works through contact of the lip on the shaft, with the outer body fixed in the housing.

It is used in equipment where lubricant must be contained and bearings or gears protected: gearboxes, centrifugal pumps, electric motors, mixers, conveyors and process machinery. It also appears in power transmission applications and in older equipment being reconditioned. When the original oil seal loses its elasticity or the lip is damaged, oil loss and the entry of contaminants accelerate bearing wear, so it should be replaced at every teardown.

To install it, check that the shaft has no burrs or deep marks in the contact area and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and place the oil seal perpendicular to the shaft, without striking it unevenly. If the shaft shows wear, an oil seal with an offset lip or a repair sleeve may be considered. Selection depends on speed, temperature and the type of lubricant, data that should be confirmed with the manufacturer.

If you need a nearby size or an equivalent from another brand, send us the full part number, the shaft, housing and height dimensions, and a photo of the part. With that data we look for the closest option within the lines we carry. We can also advise you if the oil seal is mounted in an assembly and you need to maintain the original interference. The 9245Vit designation is the direct reference for ordering this item.

To request a quote for this DBH 9245Vit oil seal, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo and the shaft and housing dimensions. That way we quickly confirm the part you need and avoid installation errors.