DBH 9150 radial shaft seal — 38 x 62 x 7

DBH 9150 is a reference of radial shaft seal, within Seals. Request a quote for 9150 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9150 oil seal is a radial shaft seal with a 38 mm shaft diameter, 62 mm housing diameter and 7 mm height, in the Lx design. Its function is to retain lubricant inside the assembly and block the entry of dust, water or particles, working on a rotating shaft. It is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales supplies this brand and advises you on choosing the right size for your application.

This item is a DBH radial shaft seal, identified by the designation 9150. Its dimensions are 38 mm shaft diameter (d), 62 mm housing diameter (D) and 7.00 mm height (h). The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. The elastomeric lip bears on the shaft and the spring maintains contact pressure; the outer body is press-fitted into the housing bore. Always confirm the dimensions against the manufacturer's data sheet before installation.

Typical applications for a seal of this size include gearboxes, reducers, centrifugal pumps, electric motors, compressors and power transmission equipment. It is also found in machine tools, process equipment and conveyor systems. In all cases it performs the dual function of retaining oil or grease and preventing the entry of contaminants, which extends the service life of bearings and gears.

For correct selection and installation, verify that the shaft diameter is within the recommended tolerance and that the contact surface has suitable roughness. The housing must be clean, free of burrs and with the entry chamfer in good condition. Lubricate the lip before installation and avoid striking it or reversing the direction of pressure. If the shaft shows wear, consider a seal with the lip in a different position.

If you need an equivalent, send us the code 9150 together with the shaft, housing and height dimensions. You can also send a photo of the old seal or the assembly drawing. With that data we check a compatible replacement.

To order this DBH 9150 oil seal or ask about an alternative, write to MR Accesorios Industriales on WhatsApp with the code and dimensions. We will reply with the option that best suits your equipment.