Radial shaft seal DBH 9071 — 14.00 x 35.00 x 8.00

DBH 9071 is a radial shaft seal reference, within Seals. Request a quote for 9071 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9071 radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. Its Lx design and dimensions of 14 mm shaft, 35 mm housing and 8 mm height place it in compact low- and medium-speed applications. It is used in pumps, electric motors, gearboxes, rollers and power transmission equipment that need a reliable barrier at the point where the shaft passes through the housing.

The DBH 9071 is a lip seal with the dimensions indicated in its designation: 14.00 mm shaft diameter, 35.00 mm housing diameter and 8.00 mm height. The Lx design corresponds to a seal with a sealing lip and metal body, intended to be press-fitted into the housing with the lip bearing on the shaft. These are the dimensions you must verify before ordering: the shaft, housing and height must match the original part.

Typical applications for a seal of this size are centrifugal pumps, electric motors, gearboxes, conveyor rollers, fan shafts and power transmission equipment. In all cases it serves the same function: keeping lubricant inside the assembly and preventing contaminants from entering from outside. It is also used as a secondary seal in housings and bearing supports where the shaft rotates on bearings and an additional barrier is needed.

To install it, check that the housing is clean, free of burrs and with the correct tolerance, and that the shaft has no marks or wear in the lip contact area. Lubricate the lip before inserting it and press the part in evenly, without striking it from the side. If the shaft shows a groove or wear, it is advisable to consider a seal with the lip in a different position or a wear sleeve. Speed, temperature and the type of lubricant determine the lip material.

If you cannot find part number 9071 or need a nearby size, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With those three data points we can look for an equivalent within the DBH line or from other brands we carry. It also helps if you tell us the equipment where it is installed and send a photo of the part, so we can identify the design and lip type.

MR Accesorios Industriales carries the DBH brand as part of its seals and oil seals line. If you want a quote for this size or to ask about an alternative, write to us on WhatsApp with part number 9071 and the shaft and housing dimensions. We will reply with the option that best fits your equipment.