DBH 9069 radial shaft seal — 12 x 35 x 7

DBH 9069 is a reference of radial shaft seal, within Seals. Request a quote for 9069 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9069 radial shaft seal is a lip seal that mounts in a component housing and seals against the rotating shaft. Its function is to retain the lubricant inside the assembly and stop the entry of dust, water or particles that accelerate wear. With dimensions of 12 mm shaft, 35 mm housing and 7 mm height, and Lx design, it is a replacement part for equipment where axial space is limited and a simple, reliable seal is needed.

This item is a DBH 9069 radial shaft seal, identified by its part number 9069. Its dimensions are 12.00 mm shaft diameter, 35.00 mm housing diameter and 7.00 mm height. The Lx design corresponds to a single-lip configuration with spring, intended for rotating shafts with lubrication. The flexible lip runs on the shaft surface and the outer body rests in the housing, creating the static and dynamic seal. It is a replacement part chosen by size and type of service, not by power or load.

It is used in gearboxes, pumps, electric motors, rollers and transmission equipment where a shaft rotates inside a housing. It also appears in machine tools, mixers and conveyors, provided the shaft has the right size and finish. In food, chemical or process plants, the lip material is chosen according to the fluid and working temperature. It is a wear component: it is advisable to check it at every preventive maintenance and replace it when leaks or loss of lubricant appear.

To install it, verify that the shaft is clean, free of burrs or marks, and that the housing has no dents. Lubricate the lip before inserting it and press the seal with a tube or shim that transmits force on the outer edge, never on the lip. If the shaft shows wear, consider a seal with the lip in another position. The selection depends on shaft speed, temperature, type of lubricant and environmental contamination; with that data the most suitable material and design are defined.

To request a quote for part number 9069 or the dimensions 12 x 35 x 7 mm and the type of application, send us. It also helps if you indicate the equipment, the brand of the original seal and a photo of the housing. With that information we look for alternatives within the DBH line or other brands we sell, always respecting the shaft, housing and height dimensions. If space allows, a seal with a different height or with a double lip can be considered.

MR Accesorios Industriales sells the DBH brand. If you want to request a quote for the DBH 9069 oil seal, write to us on WhatsApp with the part number and quantity. We reply with the corresponding reference and coordinate the shipment. We can also advise you on installation and lip care so the seal lasts as expected.