Radial shaft seal DBH 9008 — 115.00 x 170.00 x 15.00

DBH 9008 is a radial shaft seal reference, within Seals. Request a quote for 9008 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9008 radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. Because of its dimensions — 115 mm shaft, 170 mm housing bore and 15 mm height — it is used in medium-to-large power transmission equipment, where reliable sealing prevents oil loss and premature wear of bearings and bushings.

This item is a DBH 9008 radial shaft seal, with the dimensions shown in its designation: 115.00 mm shaft diameter (d), 170.00 mm housing bore diameter (D) and 15.00 mm height (h). The Lx design corresponds to a single-lip seal with a spring, intended for rotating shafts with internal lubrication. DBH is a brand that MR supplies, so the product is identified by its part number 9008 and is confirmed against the manufacturer's data sheet at the time of your inquiry.

Typical applications for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, transmission shafts and process equipment with 115 mm shafts. In these assemblies, the seal prevents oil or grease leakage and protects the bearings from contaminant ingress. It is commonly found in equipment where the shaft rotates at moderate speeds and the service temperature does not exceed the limits of the standard elastomer.

To correctly select and install a radial shaft seal, check that the shaft diameter and the housing bore diameter match the values indicated. The lip must be lubricated before installation and the shaft must have a surface free of burrs or deep marks. The 15 mm height defines the housing width and the axial position of the seal. If the equipment operates with high vibration or internal pressure, it is advisable to evaluate a design with additional reinforcement or a secondary lip.

If you need an equivalent seal or a nearby size, send us the part number 9008 along with the shaft, housing bore and height dimensions, and the equipment brand. At MR Accesorios Industriales we can look for alternatives within the same radial seal category, respecting the mounting dimensions. The more data you give us — lubricant type, temperature, rotation speed — the more accurate the replacement proposal will be.

To request a quote for the DBH 9008 seal or ask about a similar size, write to us on WhatsApp and send us the full part number. At MR Accesorios Industriales we will reply with the alternatives that best fit your equipment. You can also ask about other seals, bearings, housings or power transmission products we supply.