DBH 9006Sil radial shaft seal — 135 x 160 x 12

DBH 9006Sil is a reference of radial shaft seal, within Seals. Request a quote for 9006Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9006Sil radial shaft seal is a lip seal that is fitted into the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Because of its dimensions —135 mm shaft, 160 mm housing and 12 mm height— it is used in transmission equipment and medium-sized machinery. MR Accesorios Industriales sells it as part of its line of seals and shaft seals for industrial maintenance.

This item is a DBH 9006Sil radial shaft seal, with a shaft diameter (d) of 135 mm, a housing bore diameter (D) of 160 mm and a height (h) of 12.00 mm. The Lx design corresponds to a single lip configuration with a spring, intended for rotating shafts with oil or grease lubrication. The designation 9006Sil identifies the size and the construction type within the DBH line. It is a direct replacement component, not a mechanical seal or a static gasket.

Typical applications for a seal of this size are found in gearboxes, centrifugal pumps, conveyor rollers, fan shafts and belt or chain transmission equipment. In all cases it serves to confine the lubricant inside the assembly and prevent contaminants from entering from outside. It is also found in machine tools and process equipment where the shaft rotates continuously and the working temperature is moderate.

To select it, check that the shaft and housing dimensions match those of the original seal and that the Lx design is compatible with the direction of rotation and the type of lubricant. Installation requires cleaning the housing, lubricating the lip and seating the seal perpendicular to the shaft, without striking it directly. If the shaft shows wear or grooves, it is advisable to evaluate a repair sleeve or an alternative size before fitting the new seal.

If you need an equivalent, send us the full code of the seal you are replacing, the shaft, housing and height dimensions, and a photo or sample of the lip. With that data we can look for the corresponding DBH designation or an alternative from another brand MR sells. We can also advise you if the seal is mounted on a shaft with burrs or if the housing has a shoulder that limits the height.

To request a quote for the DBH 9006Sil seal, send the code by WhatsApp to MR Accesorios Industriales. If you have doubts about the size or the design, attach a photo of the old seal and the dimensions taken with a caliper. That way we confirm the exact reference and send you the quote without delay.