Radial shaft seal DBH 8982 — 80.00 x 115.00 x 10.00

DBH 8982 is a radial shaft seal reference, within Seals. Request a quote for 8982 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8982 radial shaft seal is a lip seal mounted on the shaft and against the housing to retain lubricant and stop the entry of dust, water or particles. Its dimensions are 80 mm shaft, 115 mm housing and 10 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment, where the shaft rotates continuously and a reliable barrier is needed between the inside and the outside.

This item is a DBH 8982 radial shaft seal, identified with part number 8982. Its attributes are: 80 mm shaft, 115 mm housing, 10 mm height and Lx design. The Lx design corresponds to a seal with a sealing lip and metal case, intended for rotating shafts. The lip runs on the shaft surface and the outer diameter is press-fitted into the housing. It is a wear part: with use, the lip loses elasticity and starts to leak oil.

Typical applications of a seal with these dimensions are in equipment with transmission shafts: gearboxes, reducers, centrifugal pumps, electric motors, mixers and rollers. It also appears in machines where an oil bath must be separated from an environment with dust or humidity. In all cases it fulfills the same function: keeping the lubricant inside and contaminants outside, extending the life of the bearings and gears behind the seal.

To install it, verify that the shaft is within tolerance and free of burrs, and that the housing has no impacts or rust in the seating area. Lubricate the lip before inserting it and use a tube or press that bears on the outer diameter, never on the lip. When selecting a replacement, take into account the shaft diameter, housing diameter, height and type of design. If the shaft is worn, a nearby size or a seal with an auxiliary lip may be advisable.

If you need the 8982 or a nearby size, send us the part number by WhatsApp. We can also look for an equivalent if you send us the shaft, housing and height dimensions, the type of design and a photo of the old part. We work with seal and oil seal brands, and if the item is not in the line we carry, we guide you toward the alternative that best fits your equipment.

MR Accesorios Industriales carries DBH oil seals and other sealing lines. With more than 80 years in the field, we advise factories, plants and maintenance teams so the right part arrives without detours. Write to us by WhatsApp with part number 8982 and we will quote it.