Radial shaft seal DBH 8983 — 75.00 x 120.00 x 13.00

DBH 8983 is a radial shaft seal reference, within Seals. Request a quote for 8983 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8983 radial shaft seal is a lip seal mounted in a machine housing to retain lubricant and prevent the entry of dust, water or particles. With dimensions of 75 mm shaft, 120 mm housing and 13 mm height, and an Lx design, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this brand and advises you so you choose the correct seal for your application.

This item is a DBH 8983 radial shaft seal, identified by its part number 8983. Its dimensions are 75 mm shaft diameter (d), 120 mm housing diameter (D) and 13.00 mm height (h). The Lx design corresponds to a single-lip configuration with spring, intended for rotating shafts. The sealing lip runs on the shaft and the outer case fits into the housing; the spring maintains contact pressure to compensate for wear and thermal variations.

Typical applications of a seal with these dimensions include gearboxes, reducers, centrifugal pumps, electric motors, compressors and power transmission equipment. In all cases it fulfills the function of retaining the oil or grease inside the assembly and blocking the entry of external contaminants. It is a wear part that should be replaced when a lubricant leak appears or when the lip shows hardening, cuts or deformation.

To install this seal, verify that the shaft measures 75 mm and the housing 120 mm, and that the available height is 13.00 mm. Check the condition of the shaft surface: it must not have burrs, deep scratches or excessive wear. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, without striking it directly. If the equipment operates with high vibration or temperature, ask about a material or design variant.

If you need an equivalent seal or a nearby size, send us part number 8983 or the dimensions of your shaft, housing and height. You can also send us a photo of the part or the drawing so we can look for the closest option within the lines we carry. At MR Accesorios Industriales we help you identify the right replacement and avoid installation errors.

To request a quote for the DBH 8983 oil seal, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that fit your equipment. If you have doubts about the installation or the condition of the shaft, ask us before replacing the part.