Radial shaft seal DBH 8945 — 62.00 x 85.00 x 8.00

DBH 8945 is a radial shaft seal reference, within Seals. Request a quote for 8945 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8945 radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With dimensions of 62 mm shaft, 85 mm housing and 8.00 mm height, and Lx design, it is a common replacement part in gearboxes, pumps and power transmission equipment. At MR Accesorios Industriales we carry it as part of our seals and oil seals line.

This item is a radial shaft seal, identified by the 8945 designation from the DBH brand. Its dimensions are 62 mm shaft diameter (d), 85 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a single lip configuration with spring, intended for rotating shafts where an effective barrier against oil or grease leaks is required. The lip runs on the shaft and the outer diameter is press-fitted into the housing.

Typical applications for a seal of these dimensions include gearboxes, reducers, centrifugal pumps, electric motors and power transmission equipment. It is also found in mixers, agitators and continuous process machinery, where sealing prevents lubricant loss and contamination of the work environment. As a wear part, it should be checked at every preventive maintenance interval.

For installation, verify that the shaft has no burrs or wear and that the housing is clean and free of deformation. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and use a flat driver to avoid damaging the seal. Seal selection depends on shaft speed, operating temperature and fluid type; if this data is not on the product page, it is confirmed with the manufacturer.

If you need an equivalent or a nearby size, send us the 8945 part number along with the shaft, housing and height dimensions shown on the drawing or on the old seal. A photo of the part and of the area where it is mounted also works. With that data we look for alternatives within the same series or with similar characteristics so you can evaluate the best option.

To request a quote for the DBH 8945 oil seal or ask about other sizes in the line, write to us on WhatsApp at MR Accesorios Industriales. We will reply with the available technical information and the alternatives we have for that part number.