Radial shaft seal DBH 8943 — 45.00 x 80.00 x 10.00

DBH 8943 is a radial shaft seal reference, within Seals. Request a quote for 8943 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8943 radial shaft seal is a lip seal that mounts on the shaft and inside the housing to retain lubricant and block the entry of dust, water or particles. Its dimensions of 45 mm shaft, 80 mm housing and 10 mm height place it in transmission and rotating equipment for intensive use. MR Accesorios Industriales carries this brand and advises you so you choose the correct seal for your application.

The DBH 8943 is an Lx design oil seal, with the dimensions shown on its product page: 45.00 mm shaft diameter, 80.00 mm housing diameter and 10.00 mm height. The Lx design corresponds to a single lip seal with spring, intended for rotating shafts where an effective barrier against oil or grease leaks and against the entry of contaminants is sought. The 8943 nomenclature identifies this size within the DBH line, and it is the reference you should have on hand when replacing.

This type of seal appears in gearboxes, pumps, electric motors, fan shafts, rollers and transmission equipment in general. It is also used in agricultural machinery, material handling equipment and process lines where there are shafts that rotate inside a housing and need to keep lubricant confined. When the seal works in a dusty or humid environment, the lip and spring must be in good condition so that sealing is not lost.

To install it properly, check that the shaft has no burrs or wear in the contact area and that the housing is clean and free of marks. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, without hitting it unevenly. If the shaft has a groove or noticeable wear, the new seal may not seal even if it has the correct size. In that case, it is advisable to evaluate a wear sleeve or a prior repair of the shaft.

If you need a nearby size or an equivalent, send us the 8943 code and the dimensions of your shaft, housing and height. With that data we can look for an alternative within the DBH line or other brands we carry. We can also guide you if the Lx design is not the most suitable for your equipment and a different type of lip or material is needed. The idea is that you do not buy blindly: first we confirm that the part matches what you have installed.

At MR Accesorios Industriales we work with seals and oil seals for different industrial applications. If you already have the 8943 code, send it via WhatsApp and we will send you the quote. If what you need is to identify the size, write to us with the equipment data and we will help you find it.