DBH 8092 radial shaft seal — 35 x 52 x 8.5

DBH 8092 is a reference of radial shaft seal, within Seals. Request a quote for 8092 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8092 radial shaft seal is a lip seal designed to prevent lubricant leaks and the ingress of contaminants on rotating shafts. With dimensions of 35 mm shaft diameter, 52 mm housing bore and 8.50 mm height, it is used in gearboxes, pumps, electric motors and industrial equipment where dynamic sealing is critical. Its A 046 design and DBH quality make it a reliable choice for maintenance and repair.

This DBH 8092 oil seal has a shaft diameter of 35 mm, a housing bore of 52 mm and a height of 8.50 mm. Its A 046 design corresponds to a single-lip radial shaft seal with spring, intended for lubricated rotating shafts. DBH is a brand that MR carries, with technical support for demanding industrial applications.

It is commonly used in gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment. In these systems, the oil seal prevents the loss of oil or grease and protects bearings and gears from dust, water or metal particles. It is a wear part that should be replaced during maintenance shutdowns to avoid premature and costly failures.

For correct installation, check that the shaft has the proper hardness and surface finish, with no burrs or marks. Lubricate the lip with the same oil used in the equipment before inserting it, and use an installation tube to avoid damaging the seal. Selection must consider peripheral speed, operating temperature and the chemical compatibility of the elastomer with the fluid. If you have any doubts, consult us with your application data.

If you need an equivalent oil seal, send us the full part number, the shaft, housing bore and height dimensions, and a photo of the part. At MR Accesorios Industriales we can look for alternatives in other brands or series that perform the same function. We also offer advice on choosing the lip material and spring type according to operating conditions.

To request a quote for the DBH 8092 oil seal or ask about other sizes, send us the part number on WhatsApp. At MR Accesorios Industriales we reply with the technical information you need for your maintenance.