DBH 8091Sil radial shaft seal — 32 x 50 x 10

DBH 8091Sil is a reference of radial shaft seal, within Seals. Request a quote for 8091Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8091Sil oil seal is a single-lip radial shaft seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. Its Lx-R-H design combines a sealing lip, a reinforcing body and a dust lip that protects the contact area. It is used in gearboxes, pumps, electric motors and power transmission equipment where a shaft rotates inside a fixed housing.

This oil seal has a shaft diameter of 32 mm, a housing diameter of 50 mm and a height of 10 mm. The Lx-R-H design indicates a sealing lip, metal reinforcement and an external dust lip, a configuration intended for environments where dirt is present. DBH is a brand that MR carries, so the replacement part is identified by its 8091Sil part number and is confirmed against the manufacturer's product page before quoting.

Typical applications for this type of oil seal include gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission equipment. In every case it works on a rotating shaft and inside a machined housing, retaining oil or grease and keeping dust out of the bearings. It is a wear part: when the lip hardens or becomes marked, it starts to lose lubricant.

To select it, check that the shaft, housing and height dimensions match the original oil seal. The shaft surface must be clean, with no burrs or deep marks, and the housing free of deformation. When mounting it, lubricate the lip with the same oil or grease used in the equipment and avoid striking it or installing it crooked. If the shaft shows wear, consider an oil seal with the lip in a different position.

To quote part number 8091Sil, send us the data of the original oil seal: shaft diameter, housing diameter, height and design type. With those values we look for an equivalent within the lines we carry. We can also advise you if the housing has a shoulder or if the shaft is worn, in order to define the best replacement option.

To request a quote for the DBH 8091Sil oil seal, write to us on WhatsApp with the part number and the quantity you need. At MR Accesorios Industriales we advise you so that the seal is properly mounted and lasts as long as it should. If you have doubts about the size, send a photo of the old oil seal and we will work it out together.