Radial shaft seal DBH 8091Vit — 32.00 x 50.00 x 10.00

DBH 8091Vit is a radial shaft seal reference, within Seals. Request a quote for 8091Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8091Vit radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With dimensions of 32 mm shaft, 50 mm housing and 10 mm height, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this official brand and advises you on choosing the right oil seal for your application.

This item is a radial shaft seal from the DBH line, identified as 8091Vit. Its dimensions are 32.00 mm shaft diameter, 50.00 mm housing diameter and 10.00 mm height. The Lx-R-H design indicates a configuration with a retaining lip, a reinforcing body and a secondary exclusion lip, suitable for service with lubricant and moderate exposure to contaminants. The sealing lip works on the rotating shaft and the outer diameter fits into the housing to prevent leaks.

Typical applications for an oil seal of these dimensions include gearboxes, speed reducers, centrifugal pumps, electric motors, compressors and belt or chain drive equipment. It is also found in machine tools, process equipment and hydraulic systems where oil or grease must be contained and the bearings protected from the entry of dirt. Its compact size makes it common on shafts up to 32 mm with standard housings.

To select and mount it correctly, check that the shaft and housing diameters match the stated dimensions, and that the height is compatible with the available space. The shaft surface must be ground and free of burrs; the housing, clean and undamaged. Lubricate the lip before mounting and avoid striking it during installation. If the equipment runs at high speed or at extreme temperatures, ask about variants in the lip material or the elastomer.

If you need an equivalent oil seal or a nearby size, send us the original part number, the shaft, housing and height dimensions, and a photo of the part. With that data we look for alternatives in the same brand or in other lines we carry. We can also advise you on the lip type, the material and the service conditions so that the replacement is the right one.

To request a quote for the DBH 8091Vit oil seal or ask about other sizes, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with the technical information and the options for your equipment.