DBH 8065 radial shaft seal — 14 x 32 x 7

DBH 8065 is a reference of radial shaft seal, within Seals. Request a quote for 8065 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8065 radial shaft seal is a lip seal that prevents oil or grease leaks and blocks the ingress of dust and water on rotating shafts. It is press-fitted into the housing and runs on the shaft with a flexible lip. It is a common wear part in electric motors, pumps, gearboxes and transmission equipment. MR Accesorios Industriales distributes this brand and advises you on choosing the correct size.

This item is a DBH 8065 radial shaft seal, a designation that corresponds to a seal of 14 mm shaft diameter, 32 mm housing diameter and 7.00 mm height. The Lx design indicates a single lip configuration with spring, suitable for rotating shafts with lubrication. The nomenclature 8065 identifies the size within the DBH line and allows ordering the same code for replacement.

It is used in equipment where lubricant must be retained and contaminants excluded: electric motors, centrifugal pumps, gearboxes, fan shafts, mixers and agricultural or industrial machinery in general. Whenever there is a shaft rotating inside a housing and sealing is necessary, this type of seal fulfills that function.

To install it, verify that the shaft is clean, free of burrs and marks, and that the housing has no dents. Lubricate the lip with the same grease or oil as the equipment before inserting it. The seal is placed with the lip facing the lubricant side and is seated with a tube of adequate diameter, never striking directly on the seal. If the shaft shows wear, consider a repair sleeve.

If you need an equivalent, send us code 8065 or the shaft, housing and height dimensions. With that data we look for alternatives in the same brand or in other lines we distribute. We can also advise you on the type of lip and material according to the fluid and working temperature.

To request a quote for the DBH 8065 oil seal, send the code via WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo of the old part or the dimensions taken with a caliper. This way we quote you and send you an alternative promptly.