Radial shaft seal DBH 8063 — 7.90 x 14.60 x 5.00

DBH 8063 is a radial shaft seal reference, within Seals. Request a quote for 8063 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8063 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts of reduced diameter. Its dimensions of 7.90 mm shaft, 14.60 mm housing and 5.00 mm height make it suitable for compact spaces where a standard seal does not fit. It is press-fitted into the cavity and runs on the shaft with a flexible lip that compensates for small misalignments. It is a frequently replaced part in small equipment, electric motors, pumps and light transmission mechanisms.

This item is a radial shaft seal from the DBH line, identified with code 8063. Its dimensions are 7.90 mm shaft diameter, 14.60 mm housing diameter and 5.00 mm height. The Lt design corresponds to a single lip configuration with spring, intended for oil or grease retention in one direction. The series nomenclature does not include further variants: each numeric code defines an exact combination of dimensions, so the 8063 does not accept direct substitutions by other numbers of the same brand.

Typical applications of this seal include small electric motors, low-power centrifugal pumps, compact gearboxes, machine tool spindles and belt or chain transmission mechanisms. It is also used in laboratory equipment, industrial printers and centralized lubrication systems. In all cases, its function is to prevent lubricant leaks and the ingress of dust, chips or water into the mechanism, extending the life of bearings and gears.

To install the seal, verify that the housing and shaft are clean, free of burrs and scratches. The housing diameter must be the one indicated for a moderate press fit; the shaft, on the other hand, must have a polished surface and adequate hardness so as not to wear the lip. Lubricate the lip with the same grease or oil as the equipment before inserting it and avoid striking it during installation. If the shaft has play or misalignment, the seal will not seal correctly.

If you need a neighboring size or an equivalent from another brand, you can send us code 8063 along with the shaft, housing and height dimensions. It also helps to indicate the type of fluid, the working temperature and the shaft revolutions. With that data, at MR Accesorios Industriales we can look for a compatible alternative within the lines we distribute. You do not need to have the exact number: the dimensions are enough to guide the search.

To request a quote for the DBH 8063 oil seal, send the code via WhatsApp to MR Accesorios Industriales. If you have doubts about the designation or want to confirm that it corresponds to your equipment, attach a photo of the old part or the dimensions taken with a caliper. This way we avoid errors and send you the correct option.