Radial shaft seal DBH 8064 — 25.00 x 38.00 x 7.00

DBH 8064 is a radial shaft seal reference, within Seals. Request a quote for 8064 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8064 radial shaft seal is a lip seal that is mounted in a component's housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 25.00 mm shaft, 38.00 mm housing bore and 7.00 mm height place it in the range of compact seals for power transmission equipment, pumps and electric motors. MR Accesorios Industriales supplies this official brand and advises you on choosing the right seal.

The DBH 8064 is a seal in the Lx-R design, with the dimensions shown on its product page: 25.00 mm shaft diameter (d), 38.00 mm housing bore diameter (D) and 7.00 mm height (h). The Lx-R design corresponds to a seal with a sealing lip and a reinforced body, intended for machined housings where the seal must sit firmly and centered. It is press-fitted into the cavity and its flexible lip runs on the shaft, compensating for small misalignments and vibrations inherent to rotation.

This type of seal is used in gearboxes, centrifugal pumps, electric motors, fan shafts and power transmission equipment in general. Its function is twofold: it prevents oil or grease from escaping the housing and, at the same time, stops contaminants from entering that accelerate the wear of bearings and gears. Because of its compact size, it is common in equipment where radial space is limited and reliable sealing is required in continuous service.

To choose the right seal, check that the shaft and housing diameters match the values on the product page, and that the cavity width accommodates the 7.00 mm height. Check the condition of the shaft surface: scratches or excessive wear prevent the lip from sealing properly. During installation, lubricate the lip with the same oil used in the equipment, insert it perpendicular to the shaft and tap only on the outer ring, never on the lip. A poorly installed seal loses effectiveness within a few hours.

If you need a nearby size or an equivalent from another brand, send us the part number 8064 or the dimensions 25 x 38 x 7 mm and the Lx-R design. With that data we search our catalog of seals and oil seals for the option that best fits your equipment. We can also guide you if the housing has a different tolerance or if the shaft shows wear and a sealing alternative should be considered.

MR Accesorios Industriales supplies the DBH brand as part of its line of seals and oil seals. If you want to request a quote for the DBH 8064 or ask about a similar size, send the part number via WhatsApp and we will reply with the technical information you need for your equipment.