Radial shaft seal DBH 6895 — 43.00 x 60.00 x 7.00

DBH 6895 is a radial shaft seal reference, within Seals. Request a quote for 6895 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6895 oil seal is a single-lip radial shaft seal designed to close off the passage of oil, grease or water at the point where a shaft rotates inside a housing. Its Lx design combines a sealing lip with a metal body that fits under pressure into the cavity. It is used in gearboxes, pumps, electric motors and power transmission equipment, where lubricant must be retained and the ingress of dust or moisture stopped.

This item is a radial shaft seal from the DBH line, identified with the code 6895. Its dimensions are 43.00 mm shaft diameter (d), 60.00 mm housing diameter (D) and 7.00 mm height (h). The Lx design corresponds to an oil seal with a sealing lip and metal case, without an external dust lip. Those three dimensions are the ones you have to check before replacing a part: the shaft, the cavity and the available width in the housing.

The typical applications of an oil seal of this size appear in equipment with medium-section transmission shafts: reducers and gearboxes, centrifugal pumps, electric motors, compressors and machine tools. It is also found on roller and conveyor shafts where the bearing grease must be contained and particulate material kept out. In all cases it works against a rotating shaft and against a machined housing surface.

To select it properly, check that the shaft diameter is within the tolerance recommended for radial shaft seals and that the cavity has the proper finish and hardness. The lip must be lubricated before installation and oriented toward the side of the fluid to be retained. If the shaft shows wear or a marked groove, it is advisable to consider an oil seal with an offset lip position or a nearby size that allows it to rest on a sound area.

If the code 6895 is not the one you need, or if the shaft or housing has a different dimension, send us the data on WhatsApp. With the shaft diameter, housing diameter and height we can look for an equivalent in the same DBH line or in another brand, and quote nearby sizes. We can also advise you if the oil seal is mounted together with a bearing or a bushing.

At MR Accesorios Industriales we work with seals and oil seals for maintenance and replacement. Send the code 6895 or your equipment dimensions on WhatsApp and we will quote the oil seal or its equivalent. If you have questions about installation, lip type or material, ask us before buying: we help you choose the right part so the equipment runs leak-free again.