DBH 6894Pol radial shaft seal — 75 x 100 x 12/13

DBH 6894Pol is a reference of radial shaft seal, within Seals. Request a quote for 6894Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6894Pol oil seal is a radial shaft seal of design A 023-R that fits between a rotating shaft and its housing to retain lubricant and block the entry of dust, water or particles. Because of its dimensions — 75 mm shaft, 100 mm housing and 12/13 mm height — it is used in gearboxes, pumps, motors and power transmission equipment. MR Accesorios Industriales sells this DBH reference within its seals and oil seals line.

This item is a DBH radial shaft seal identified as 6894Pol. Its dimensions are 75 mm shaft diameter, 100 mm housing diameter and a height of 12/13 mm, which indicates a double-height lip or a design with an integrated dust lip. It corresponds to design A 023-R, a single-lip geometry with metal reinforcement. The code 6894Pol is DBH's commercial designation for this size, and it is advisable to verify that it matches the original part before replacing it.

Seals of this size are found in equipment where a 75 mm shaft rotates inside a 100 mm housing: gearboxes, reducers, centrifugal pumps, electric motors, mixers and conveyors. Their function is twofold: keep the oil or grease inside the assembly and prevent contaminants from entering from outside. In environments with dust, wash water or chips, the sealing lip works against a ground and lubricated shaft to maintain contact.

To install an oil seal, check the condition of the shaft: no burrs, no deep wear marks, and adequate hardness and roughness. The housing must be clean, free of dents and with the correct diameter. It is recommended to lubricate the lip with the same grease or oil used in the equipment, insert the seal perpendicular to the shaft and press it in with a tube or spacer that bears on the outer ring, never on the lip. If the shaft has a worn track, consider mounting the seal offset or using a repair sleeve.

If you need an equivalent, send us the code 6894Pol along with the shaft, housing and height dimensions, and the type of application. A photo of the old part or the housing drawing also works. With that data we look for the corresponding DBH reference or an alternative from another brand with the same geometry. If space allows, we can evaluate variants with an additional lip or dust lip.

MR Accesorios Industriales sells the DBH brand as part of its seals and oil seals line. To request a quote for the 6894Pol oil seal, write to us on WhatsApp with the code and dimensions. We will reply with the alternatives that fit your equipment.