Radial shaft seal DBH 6180 — 125.00 x 150.00 x 15.00

DBH 6180 is a radial shaft seal reference, within Seals. Request a quote for 6180 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6180 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With dimensions of 125 mm shaft, 150 mm housing and 15 mm height, and Lx design, it is a replacement part for industrial equipment that requires a reliable barrier under continuous rotation conditions.

This item is a radial shaft seal from the DBH brand, identified with part number 6180. Its dimensions are 125 mm shaft diameter (d), 150 mm housing diameter (D) and 15.00 mm height (h). The Lx design corresponds to a single lip configuration with spring, intended for rotating shafts where constant sealing action is required. The lip elastomer works on the shaft race and the outer diameter maintains the fit in the housing.

It is used in gearboxes, pumps, electric motors, conveyor rollers and power transmission equipment. It also appears in machine tools, agitators and lubrication systems where oil or grease leaks must be prevented and bearings protected from the environment. It is a wear part: when the lip hardens or becomes marked, it starts to leak and should be replaced before it damages the shaft or contaminates the lubricant.

To select the seal, verify that the shaft, housing and height dimensions match those of your equipment's housing and shaft. Check the condition of the race: if it has a groove or wear, the new lip will not seal properly. During installation, lubricate the lip with the same service oil or grease, insert it perpendicular to the shaft and avoid striking it. If the original design has an auxiliary lip or specific material, confirm it with the manufacturer's data sheet before replacing.

If you cannot find part number 6180 or need a nearby size, send us the dimensions of the old seal (shaft, housing and height) and a photo of the part. The code engraved on the seal or the equipment model also helps. With that data we can look for an equivalent within the DBH line or other brands we carry, always respecting the dimensions and design type.

MR Accesorios Industriales carries the DBH brand and has more than 80 years of experience in the industry. If you need a quote for this seal or to inquire about a special application, write to us on WhatsApp with part number 6180 and we will reply with the technical information you need.