DBH 6179 radial shaft seal — 60 x 85 x 10

DBH 6179 is a reference of radial shaft seal, within Seals. Request a quote for 6179 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6179 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the ingress of dust, water or particles. With dimensions of 60 mm shaft, 85 mm housing bore and 10 mm height, and an Lx design, it is a common replacement part in gearboxes, pumps and power transmission equipment. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH 6179 radial shaft seal, identified by its 6179 designation. Its dimensions are 60.00 mm shaft diameter (d), 85.00 mm housing bore diameter (D) and 10.00 mm height (h). The Lx design corresponds to a single-lip seal with spring, without additional dust protection. The sealing lip runs on the shaft and the outer case fits into the housing to prevent lubricant from passing through.

It is used in equipment where a shaft rotates inside a crankcase or housing: gearboxes, centrifugal pumps, electric motors, mixers and conveyors. It also appears in agricultural and industrial applications where oil or grease must be contained and contamination kept out. It is a wear part that is replaced when lubricant leakage or dirt ingress appears.

To install it, check that the shaft and housing are clean, with no burrs or marks. Lubricate the lip with the same oil or grease used in the equipment before inserting it. The seal must go in straight, without blows that deform the case. If the shaft shows wear, consider a seal with the lip in a different position. Selection depends on speed, temperature and the fluid to be retained.

If you need an equivalent or a different size, send us the code 6179 or the dimensions 60 x 85 x 10 mm and the design type. We can also look for a seal with dust protection if the environment is dirty. The idea is for you to get the right replacement part without hassle.

To request a quote for this DBH 6179 seal, send the code on WhatsApp to MR Accesorios Industriales. If you have doubts about the application, attach a photo of the old seal or the dimensions measured with a caliper. That way we can confirm the exact part.