Radial shaft seal DBH 6076 — 95.00 x 152.00 x 17.00

DBH 6076 is a radial shaft seal reference, within Seals. Request a quote for 6076 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6076 oil seal is a radial shaft seal with a 95 mm shaft diameter, 152 mm housing diameter and 17 mm height, in Lx design. It is used to retain lubricant and exclude contaminants in rotating equipment such as pumps, electric motors, reducers and gearboxes. Its elastomeric lip works against the shaft and its metal case is press-fitted into the housing. It is a wear part that is replaced during scheduled maintenance or when visible leaks appear.

The DBH 6076 is a radial shaft seal with dimensions of 95.00 mm shaft (d), 152.00 mm housing (D) and 17.00 mm height (h). The Lx design indicates the lip and case configuration. The DBH brand is an official brand that MR carries, so the replacement part is identified by its code and dimensions. Before installing, check that the shaft and housing match these values and that the sealing surface has no burrs or marks.

Typical applications for this oil seal include centrifugal pumps, electric motors, reducers, gearboxes and transmission equipment. In all cases, its function is twofold: to retain the oil or grease inside the assembly and to prevent dust, water or particles from entering. That is why it is found in the food, chemical and water treatment industries and in process plants in general, where lubricant cleanliness is critical to bearing service life.

To select and install an oil seal, you must take into account the peripheral shaft speed, the working temperature and the type of lubricant. The lip must be lubricated before start-up and the housing must be clean and undamaged. The 17.00 mm height defines the available axial space. If the shaft shows wear, consider a repair sleeve or a neighboring size. Always check the concentricity between shaft and housing to avoid premature leaks.

If you need an equivalent or a neighboring size, send us the 6076 code or the 95 x 152 x 17 mm dimensions by WhatsApp. At MR Accesorios Industriales we can advise you on alternatives from the same brand or from other brands we carry. We can also help you identify the oil seal from the shaft, housing and height dimensions. The more data you send us, the more accurate the search will be.

To request a quote for the DBH 6076 oil seal, write to us by WhatsApp with the code and the quantity you need. At MR Accesorios Industriales we handle technical and commercial inquiries for seals and oil seals. If you have doubts about the designation or the design, send us a photo of the part and the dimensions measured with a caliper. That way we can confirm that the replacement is the correct one and avoid installation errors.