Radial shaft seal DBH 6074Pol — 125.00 x 150.00 x 13.00

DBH 6074Pol is a radial shaft seal reference, within Seals. Request a quote for 6074Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6074Pol radial shaft seal is a lip seal designed to block the passage of oil or grease in equipment with a rotating shaft. With a 125 mm shaft diameter, 150 mm housing diameter and 13 mm height, it is press-fitted into the housing and works against the shaft to retain lubricant and stop dust or water from entering. It is a common replacement part in pumps, electric motors and gear reducers.

This DBH 6074Pol oil seal has a shaft diameter of 125 mm, a housing diameter of 150 mm and a height of 13.00 mm. The Mx design corresponds to a configuration with a sealing lip and metal body, intended for housings that require a firm fit and an effective barrier against contamination. The 6074Pol designation identifies the exact size within the DBH line, and it is the reference you should have on hand when ordering the replacement.

It is used in equipment where a shaft rotates inside a housing containing lubricant: centrifugal pumps, electric motors, reducers, mixers and conveyors. At those points, the oil seal prevents leaks that dirty the surroundings and cause lubricant loss, while at the same time keeping dust or water from entering the bearing or the gear. It is a wear part that is replaced during scheduled maintenance or when a visible leak appears.

To install it, check that the shaft has no burrs or marks that could damage the lip, lubricate the seal before inserting it and apply force on the metal body, never on the lip. The housing must be clean and free of old sealant residue. If the shaft shows wear, consider a neighboring size or a seal with the lip in a different position. The selection depends on the speed, temperature and type of lubricant of the equipment.

If you need an equivalent or a close size, send us the 6074Pol code or the shaft, housing and height dimensions. With that data we can look for alternatives within the DBH line or from other brands we carry, always confirming the technical characteristics. We can also advise you if the Mx design is not the right one for your application.

MR Accesorios Industriales carries the DBH brand. If you want a quote for this oil seal or to ask about a similar size, send the 6074Pol code by WhatsApp and we will reply with the technical information and the corresponding quote.