Radial shaft seal DBH 5831Pol — 38.10 x 60.30 x 15.87

DBH 5831Pol is a radial shaft seal reference, within Seals. Request a quote for 5831Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5831Pol radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Due to its dimensions of 38.10 mm shaft, 60.30 mm housing and 15.87 mm height, it is used in gearboxes, pumps, electric motors and transmission equipment that operate with medium-section shafts. MR Accesorios Industriales sells this official brand and helps you confirm the size before requesting a quote.

This item is a seal with an A 083 design, with the dimensions shown on the product page: shaft diameter 38.10 mm, housing diameter 60.30 mm and height 15.87 mm. These three dimensions define the seat: the outer diameter fits into the housing with interference, the lip rests on the shaft and the height determines how far the seal protrudes. The A 083 design corresponds to a single-lip seal with a spring, suitable for rotating shafts with continuous lubrication. Always verify the actual shaft and housing dimensions before replacing.

Typical applications for a seal of this section include gearboxes, speed reducers, centrifugal pumps, electric motors, compressors and belt or chain transmission equipment. In all these cases the seal performs two functions: preventing oil or grease leakage to the outside and stopping the entry of contaminants that wear bearings and gears. It is also used in agricultural machinery, material handling equipment and process lines where the shaft rotates continuously.

To select the correct seal, in addition to the three dimensions, take into account the rotation speed, working temperature and type of lubricant. A lip with a spring is the usual option when there is low internal pressure or when a firmer seal is sought. During assembly, clean the housing, lubricate the lip with the same grease or oil used in the equipment and press evenly and perpendicularly so as not to damage the lip or deform the casing. If the shaft shows wear or scoring, consider a nearby size or a seal with an auxiliary lip.

If you need an equivalent or a nearby size, send us part number 5831Pol along with the shaft, housing and height dimensions, and a photo of the old seal if possible. With that data we can look for alternatives within the DBH line or other brands we sell, always respecting the dimensions on the product page.

MR Accesorios Industriales has more than 80 years in the industry and sells seals, bearings, power transmission and lubricants. If this DBH 5831Pol oil seal is the one you are looking for, write to us on WhatsApp with the part number and dimensions. We will reply with the quote and the alternatives that best suit your equipment.